From 1be6857b0e8dfe0626e6f2b7836391d4e8492d3c Mon Sep 17 00:00:00 2001
From: su530201 <olivier.kaufmann@umons.ac.be>
Date: Thu, 31 Aug 2023 14:31:05 +0200
Subject: [PATCH] Updates a dev/test for 3 muxes 2024
---
dev/test_3_mux_2024.py | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/dev/test_3_mux_2024.py b/dev/test_3_mux_2024.py
index 6ea2a1a1..b2122d37 100644
--- a/dev/test_3_mux_2024.py
+++ b/dev/test_3_mux_2024.py
@@ -7,9 +7,9 @@ from ohmpi.hardware_components.mux_2024_rev_0_0 import Mux, MUX_CONFIG
from ohmpi.hardware_components import raspberry_pi_i2c as ctl_module
from ohmpi.config import HARDWARE_CONFIG
-stand_alone_mux = True
+stand_alone_mux = False
part_of_hardware_system = False
-within_ohmpi = False
+within_ohmpi = True
# Stand alone mux
if stand_alone_mux:
mux_id = 'mux_04'
@@ -47,10 +47,11 @@ if within_ohmpi:
from ohmpi.ohmpi import OhmPi
print('Starting test of mux within OhmPi.')
k = OhmPi()
+ A, B, M, N = (25, 28, 27, 26)
k.reset_mux()
- k._hw.switch_mux([10, 13, 12, 11], state='on')
+ k._hw.switch_mux([A, B, M, N], state='on')
k._hw.vab_square_wave(12.,12., cycles=2)
- k._hw.switch_mux([10, 13, 12, 11], state='off')
+ k._hw.switch_mux([A, B, M, N], state='off')
k._hw.calibrate_rx_bias() # electrodes 1 4 2 3 should be connected to a reference circuit
# print(f'Resistance: {k._hw.last_rho :.2f} ohm, dev. {k._hw.last_dev:.2f} %, rx bias: {k._hw.rx._bias:.2f} mV')
# k._hw._plot_readings()
--
GitLab