diff --git a/dev/test_mb_2024_4_mux_2024.py b/dev/test_mb_2024_4_mux_2024.py
index d30d4daec881c5fd5640855ec3b948552c6e9260..fe346989dd62e74865ac55cf8b074c067c4ba67e 100644
--- a/dev/test_mb_2024_4_mux_2024.py
+++ b/dev/test_mb_2024_4_mux_2024.py
@@ -109,12 +109,12 @@ if within_ohmpi:
     # k._hw.switch_mux([A, B, M, N], state='off')
     # print(f'OhmPiHardware Resistance: {k._hw.last_rho :.2f} ohm, dev. {k._hw.last_dev:.2f} %, rx bias: {k._hw.rx._bias:.2f} mV')
     # k._hw._plot_readings()
-    k.load_sequence('sequences/9991_GRAD_16_s1_a1.txt')
-    k.run_sequence(tx_volt=5, injection_duration=1., nb_stack=2, duty_cycle=0.5)
-    print('using OhmPi')
-    # d = k.run_measurement([A, B, M, N], injection_duration=1., nb_stack=2, duty_cycle=0.5, tx_volt=5., delay=0.01)
-    # print(d)
-    # k._hw._plot_readings()
+    # k.load_sequence('sequences/9991_GRAD_16_s1_a1.txt')
+    # k.run_sequence(tx_volt=5, injection_duration=1., nb_stack=2, duty_cycle=0.5)
+    # print('using OhmPi')
+    d = k.run_measurement([A, B, M, N], injection_duration=1., nb_stack=2, duty_cycle=0.5, tx_volt=42., strategy='vmax', vab_max=40., delay=0.01)
+    print(d)
+    k._hw._plot_readings()
     # print(f'OhmPiHardware: Resistance: {k._hw.last_resistance() :.2f} ohm, dev. {k._hw.last_dev():.2f} %, sp: {k._hw.sp:.2f} mV, rx bias: {k._hw.rx._bias:.2f} mV')
     # print(f'OhmPi: Resistance: {d["R [Ohm]"] :.2f} ohm, dev. {d["R_std [%]"]:.2f} %, rx bias: {k._hw.rx._bias:.2f} mV')
     # k._hw._plot_readings(save_fig=False)