From 50a90aab81bee88d2be1f35f99f070d1f2fef1fe Mon Sep 17 00:00:00 2001
From: su530201 <olivier.kaufmann@umons.ac.be>
Date: Fri, 20 Oct 2023 00:38:28 +0200
Subject: [PATCH] Searches why vab > vab_max
---
dev/test_mb_2024_4_mux_2024.py | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/dev/test_mb_2024_4_mux_2024.py b/dev/test_mb_2024_4_mux_2024.py
index d30d4dae..fe346989 100644
--- a/dev/test_mb_2024_4_mux_2024.py
+++ b/dev/test_mb_2024_4_mux_2024.py
@@ -109,12 +109,12 @@ if within_ohmpi:
# k._hw.switch_mux([A, B, M, N], state='off')
# print(f'OhmPiHardware Resistance: {k._hw.last_rho :.2f} ohm, dev. {k._hw.last_dev:.2f} %, rx bias: {k._hw.rx._bias:.2f} mV')
# k._hw._plot_readings()
- k.load_sequence('sequences/9991_GRAD_16_s1_a1.txt')
- k.run_sequence(tx_volt=5, injection_duration=1., nb_stack=2, duty_cycle=0.5)
- print('using OhmPi')
- # d = k.run_measurement([A, B, M, N], injection_duration=1., nb_stack=2, duty_cycle=0.5, tx_volt=5., delay=0.01)
- # print(d)
- # k._hw._plot_readings()
+ # k.load_sequence('sequences/9991_GRAD_16_s1_a1.txt')
+ # k.run_sequence(tx_volt=5, injection_duration=1., nb_stack=2, duty_cycle=0.5)
+ # print('using OhmPi')
+ d = k.run_measurement([A, B, M, N], injection_duration=1., nb_stack=2, duty_cycle=0.5, tx_volt=42., strategy='vmax', vab_max=40., delay=0.01)
+ print(d)
+ k._hw._plot_readings()
# print(f'OhmPiHardware: Resistance: {k._hw.last_resistance() :.2f} ohm, dev. {k._hw.last_dev():.2f} %, sp: {k._hw.sp:.2f} mV, rx bias: {k._hw.rx._bias:.2f} mV')
# print(f'OhmPi: Resistance: {d["R [Ohm]"] :.2f} ohm, dev. {d["R_std [%]"]:.2f} %, rx bias: {k._hw.rx._bias:.2f} mV')
# k._hw._plot_readings(save_fig=False)
--
GitLab