diff --git a/config.py b/config.py
index 673d71bd8fa4c6dfc919cdc575f2fd551f492ad8..021481c4e0f399a04981203ac2e1497918b10c65 100644
--- a/config.py
+++ b/config.py
@@ -14,54 +14,29 @@ logging_suffix = ''
# OhmPi configuration
OHMPI_CONFIG = {
'id': ohmpi_id, # Unique identifier of the OhmPi board (string)
- # 'R_shunt': 2, # Shunt resistance in Ohms
- # 'Imax': 4800 / 50 / 2, # Maximum current
- # 'coef_p2': 2.50, # slope for current conversion for ADS.P2, measurement in V/V
- # 'nb_samples': 20, # Max value 10 # was named integer before...
- # 'version': 2, # Is this still needed?
- # 'max_elec': 64,
- # 'board_addresses': {'A': 0x73, 'B': 0x72, 'M': 0x71, 'N': 0x70}, # CHECK IF YOUR BOARDS HAVE THESE ADDRESSES
'settings': 'ohmpi_settings.json', # INSERT YOUR FAVORITE SETTINGS FILE HERE
- # 'board_version': 'mb.2023.0.0',#,'22.10',
- # 'mcp_board_address': 0x20
-} # TODO: add a dictionary with INA models and associated gain values
+}
-"""HARDWARE_CONFIG = {
+HARDWARE_CONFIG = {
'controller': {'model' : 'raspberry_pi_3'
},
- 'tx' : {'model' : 'mb_2024_rev_0_0',
+ 'tx' : {'model' : 'ohmpi_card_3_15',
'mcp_board_address': 0x20,
- 'Imax': 4800 / 50 / 2, # Maximum current
- 'R_shunt': 2 # Shunt resistance in Ohms
+ 'current_max': 4800 / 50 / 2, # Maximum current
+ 'r_shunt': 2 # Shunt resistance in Ohms
},
- 'rx' : {'model': 'mb_2024_rev_0_0',
+ 'rx' : {'model': 'ohmpi_card_3_15',
'coef_p2': 2.50, # slope for current conversion for ADS.P2, measurement in V/V
'nb_samples': 20, # Max value 10 # was named integer before...
},
- 'mux': {'model' : 'mux_2021',
+ 'mux': {'model' : 'ohmpi_i2c_mux64_v1.01',
'max_elec': 64,
'board_addresses': {'A': 0x73, 'B': 0x72, 'M': 0x71, 'N': 0x70}, # CHECK IF YOUR BOARDS HAVE THESE ADDRESSES
- 'coef_p2': 2.50, # slope for current conversion for ADS.P2, measurement in V/V
- 'nb_samples': 20 # Max value 10 # was named integer before...
- }
-}"""
-
-HARDWARE_CONFIG = {
- 'controller': {'model' : 'dummy_controller'
- },
- 'tx' : {'model' : 'dummy_tx',
- 'current_max': 4800 / 50 / 2, # Maximum current mA
- 'r_shunt': 2, # Shunt resistance in Ohms
- 'low_battery': 12. # Volts
- },
- 'rx' : {'model': 'dummy_rx',
- },
- 'mux': {'model' : 'dummy_mux',
- 'max_elec': 64,
- 'voltage_max' : 100,
- 'current_max' : 3
+ 'voltage_max': 100,
+ 'current_max': 3
}
}
+
# SET THE LOGGING LEVELS, MQTT BROKERS AND MQTT OPTIONS ACCORDING TO YOUR NEEDS
# Execution logging configuration
EXEC_LOGGING_CONFIG = {
diff --git a/config_default.py b/config_default.py
new file mode 100644
index 0000000000000000000000000000000000000000..df5f5927516b4ab20a29bd7257fc77b2d4ed1a21
--- /dev/null
+++ b/config_default.py
@@ -0,0 +1,106 @@
+import logging
+from OhmPi.utils import get_platform
+
+from paho.mqtt.client import MQTTv31
+
+_, on_pi = get_platform()
+# DEFINE THE ID OF YOUR OhmPi
+ohmpi_id = '0001' if on_pi else 'XXXX'
+# DEFINE YOUR MQTT BROKER (DEFAULT: 'localhost')
+mqtt_broker = 'localhost' if on_pi else 'NAME_YOUR_BROKER_WHEN_IN_SIMULATION_MODE_HERE'
+# DEFINE THE SUFFIX TO ADD TO YOUR LOGS FILES
+logging_suffix = ''
+
+# OhmPi configuration
+OHMPI_CONFIG = {
+ 'id': ohmpi_id, # Unique identifier of the OhmPi board (string)
+ 'settings': 'ohmpi_settings.json', # INSERT YOUR FAVORITE SETTINGS FILE HERE
+}
+
+HARDWARE_CONFIG = {
+ 'controller': {'model' : 'dummy_controller'
+ },
+ 'tx' : {'model' : 'dummy_tx',
+ 'current_max': 4800 / 50 / 2, # Maximum current mA
+ 'r_shunt': 2, # Shunt resistance in Ohms
+ 'low_battery': 12. # Volts
+ },
+ 'rx' : {'model': 'dummy_rx',
+ },
+ 'mux': {'model' : 'dummy_mux',
+ 'max_elec': 64,
+ 'voltage_max' : 100,
+ 'current_max' : 3
+ }
+}
+# SET THE LOGGING LEVELS, MQTT BROKERS AND MQTT OPTIONS ACCORDING TO YOUR NEEDS
+# Execution logging configuration
+EXEC_LOGGING_CONFIG = {
+ 'logging_level': logging.INFO,
+ 'log_file_logging_level': logging.DEBUG,
+ 'logging_to_console': True,
+ 'file_name': f'exec{logging_suffix}.log',
+ 'max_bytes': 262144,
+ 'backup_count': 30,
+ 'when': 'd',
+ 'interval': 1
+}
+
+# Data logging configuration
+DATA_LOGGING_CONFIG = {
+ 'logging_level': logging.INFO,
+ 'logging_to_console': True,
+ 'file_name': f'data{logging_suffix}.log',
+ 'max_bytes': 16777216,
+ 'backup_count': 1024,
+ 'when': 'd',
+ 'interval': 1
+}
+
+# State of Health logging configuration (For a future release)
+SOH_LOGGING_CONFIG = {
+ 'logging_level': logging.INFO,
+ 'logging_to_console': True,
+ 'file_name': f'soh{logging_suffix}.log',
+ 'max_bytes': 16777216,
+ 'backup_count': 1024,
+ 'when': 'd',
+ 'interval': 1
+}
+
+# MQTT logging configuration parameters
+MQTT_LOGGING_CONFIG = {
+ 'hostname': mqtt_broker,
+ 'port': 1883,
+ 'qos': 2,
+ 'retain': False,
+ 'keepalive': 60,
+ 'will': None,
+ 'auth': {'username': 'mqtt_user', 'password': 'mqtt_password'},
+ 'tls': None,
+ 'protocol': MQTTv31,
+ 'transport': 'tcp',
+ 'client_id': f'{OHMPI_CONFIG["id"]}',
+ 'exec_topic': f'ohmpi_{OHMPI_CONFIG["id"]}/exec',
+ 'exec_logging_level': logging.DEBUG,
+ 'data_topic': f'ohmpi_{OHMPI_CONFIG["id"]}/data',
+ 'data_logging_level': DATA_LOGGING_CONFIG['logging_level'],
+ 'soh_topic': f'ohmpi_{OHMPI_CONFIG["id"]}/soh',
+ 'soh_logging_level': SOH_LOGGING_CONFIG['logging_level']
+}
+
+# MQTT control configuration parameters
+MQTT_CONTROL_CONFIG = {
+ 'hostname': mqtt_broker,
+ 'port': 1883,
+ 'qos': 2,
+ 'retain': False,
+ 'keepalive': 60,
+ 'will': None,
+ 'auth': {'username': 'mqtt_user', 'password': 'mqtt_password'},
+ 'tls': None,
+ 'protocol': MQTTv31,
+ 'transport': 'tcp',
+ 'client_id': f'{OHMPI_CONFIG["id"]}',
+ 'ctrl_topic': f'ohmpi_{OHMPI_CONFIG["id"]}/ctrl'
+}
diff --git a/config_mb_2024_rev_0_0.py b/config_mb_2024_rev_0_0.py
index ab77038c01c360ca4b461b4ad121a8d63c4f5596..90b0f0a4c6d1bc859ec40fed0cd7f8988afc448a 100644
--- a/config_mb_2024_rev_0_0.py
+++ b/config_mb_2024_rev_0_0.py
@@ -14,17 +14,8 @@ logging_suffix = ''
# OhmPi configuration
OHMPI_CONFIG = {
'id': ohmpi_id, # Unique identifier of the OhmPi board (string)
- # 'R_shunt': 2, # Shunt resistance in Ohms
- # 'Imax': 4800 / 50 / 2, # Maximum current
- # 'coef_p2': 2.50, # slope for current conversion for ADS.P2, measurement in V/V
- # 'nb_samples': 20, # Max value 10 # was named integer before...
- # 'version': 2, # Is this still needed?
- # 'max_elec': 64,
- # 'board_addresses': {'A': 0x73, 'B': 0x72, 'M': 0x71, 'N': 0x70}, # CHECK IF YOUR BOARDS HAVE THESE ADDRESSES
'settings': 'ohmpi_settings.json', # INSERT YOUR FAVORITE SETTINGS FILE HERE
- # 'board_version': 'mb.2023.0.0',#,'22.10',
- # 'mcp_board_address': 0x20
-} # TODO: add a dictionary with INA models and associated gain values
+}
HARDWARE_CONFIG = {
'controller': {'model' : 'raspberry_pi_3'
@@ -32,7 +23,7 @@ HARDWARE_CONFIG = {
'tx' : {'model' : 'mb_2024_rev_0_0',
'mcp_board_address': 0x20,
'current_max': 4800 / 50 / 2, # Maximum current
- 'R_shunt': 2 # Shunt resistance in Ohms
+ 'r_shunt': 2 # Shunt resistance in Ohms
},
'rx' : {'model': 'mb_2024_rev_0_0',
'coef_p2': 2.50, # slope for current conversion for ADS.P2, measurement in V/V
diff --git a/config_ohmpi_card_3_15.py b/config_ohmpi_card_3_15.py
new file mode 100644
index 0000000000000000000000000000000000000000..021481c4e0f399a04981203ac2e1497918b10c65
--- /dev/null
+++ b/config_ohmpi_card_3_15.py
@@ -0,0 +1,110 @@
+import logging
+from OhmPi.utils import get_platform
+
+from paho.mqtt.client import MQTTv31
+
+_, on_pi = get_platform()
+# DEFINE THE ID OF YOUR OhmPi
+ohmpi_id = '0001' if on_pi else 'XXXX'
+# DEFINE YOUR MQTT BROKER (DEFAULT: 'localhost')
+mqtt_broker = 'localhost' if on_pi else 'NAME_YOUR_BROKER_WHEN_IN_SIMULATION_MODE_HERE'
+# DEFINE THE SUFFIX TO ADD TO YOUR LOGS FILES
+logging_suffix = ''
+
+# OhmPi configuration
+OHMPI_CONFIG = {
+ 'id': ohmpi_id, # Unique identifier of the OhmPi board (string)
+ 'settings': 'ohmpi_settings.json', # INSERT YOUR FAVORITE SETTINGS FILE HERE
+}
+
+HARDWARE_CONFIG = {
+ 'controller': {'model' : 'raspberry_pi_3'
+ },
+ 'tx' : {'model' : 'ohmpi_card_3_15',
+ 'mcp_board_address': 0x20,
+ 'current_max': 4800 / 50 / 2, # Maximum current
+ 'r_shunt': 2 # Shunt resistance in Ohms
+ },
+ 'rx' : {'model': 'ohmpi_card_3_15',
+ 'coef_p2': 2.50, # slope for current conversion for ADS.P2, measurement in V/V
+ 'nb_samples': 20, # Max value 10 # was named integer before...
+ },
+ 'mux': {'model' : 'ohmpi_i2c_mux64_v1.01',
+ 'max_elec': 64,
+ 'board_addresses': {'A': 0x73, 'B': 0x72, 'M': 0x71, 'N': 0x70}, # CHECK IF YOUR BOARDS HAVE THESE ADDRESSES
+ 'voltage_max': 100,
+ 'current_max': 3
+ }
+}
+
+# SET THE LOGGING LEVELS, MQTT BROKERS AND MQTT OPTIONS ACCORDING TO YOUR NEEDS
+# Execution logging configuration
+EXEC_LOGGING_CONFIG = {
+ 'logging_level': logging.INFO,
+ 'log_file_logging_level': logging.DEBUG,
+ 'logging_to_console': True,
+ 'file_name': f'exec{logging_suffix}.log',
+ 'max_bytes': 262144,
+ 'backup_count': 30,
+ 'when': 'd',
+ 'interval': 1
+}
+
+# Data logging configuration
+DATA_LOGGING_CONFIG = {
+ 'logging_level': logging.INFO,
+ 'logging_to_console': True,
+ 'file_name': f'data{logging_suffix}.log',
+ 'max_bytes': 16777216,
+ 'backup_count': 1024,
+ 'when': 'd',
+ 'interval': 1
+}
+
+# State of Health logging configuration (For a future release)
+SOH_LOGGING_CONFIG = {
+ 'logging_level': logging.INFO,
+ 'logging_to_console': True,
+ 'file_name': f'soh{logging_suffix}.log',
+ 'max_bytes': 16777216,
+ 'backup_count': 1024,
+ 'when': 'd',
+ 'interval': 1
+}
+
+# MQTT logging configuration parameters
+MQTT_LOGGING_CONFIG = {
+ 'hostname': mqtt_broker,
+ 'port': 1883,
+ 'qos': 2,
+ 'retain': False,
+ 'keepalive': 60,
+ 'will': None,
+ 'auth': {'username': 'mqtt_user', 'password': 'mqtt_password'},
+ 'tls': None,
+ 'protocol': MQTTv31,
+ 'transport': 'tcp',
+ 'client_id': f'{OHMPI_CONFIG["id"]}',
+ 'exec_topic': f'ohmpi_{OHMPI_CONFIG["id"]}/exec',
+ 'exec_logging_level': logging.DEBUG,
+ 'data_topic': f'ohmpi_{OHMPI_CONFIG["id"]}/data',
+ 'data_logging_level': DATA_LOGGING_CONFIG['logging_level'],
+ 'soh_topic': f'ohmpi_{OHMPI_CONFIG["id"]}/soh',
+ 'soh_logging_level': SOH_LOGGING_CONFIG['logging_level']
+}
+
+# MQTT control configuration parameters
+MQTT_CONTROL_CONFIG = {
+ 'hostname': mqtt_broker,
+ 'port': 1883,
+ 'qos': 2,
+ 'retain': False,
+ 'keepalive': 60,
+ 'will': None,
+ 'auth': {'username': 'mqtt_user', 'password': 'mqtt_password'},
+ 'tls': None,
+ 'protocol': MQTTv31,
+ 'transport': 'tcp',
+ 'client_id': f'{OHMPI_CONFIG["id"]}',
+ 'ctrl_topic': f'ohmpi_{OHMPI_CONFIG["id"]}/ctrl'
+}
diff --git a/measure.py b/measure.py
index 6013743a68c3d05914f7c550e50f87e9b7afb38f..bc3ef817c4de0d299bb2518a2935aca14d10cbb6 100644
--- a/measure.py
+++ b/measure.py
@@ -48,18 +48,18 @@ class OhmPiHardware:
def _vab_pulse(self, vab, length, polarity=None):
""" Gets VMN and IAB from a single voltage pulse
"""
- def inject(length):
+ def inject(duration):
self.tx_sync.set()
- self.tx.voltage_pulse(length=length)
+ self.tx.voltage_pulse(length=duration)
self.tx_sync.clear()
def read_values():
- readings = []
+ _readings = []
self.tx_sync.wait()
start_time = time.gmtime()
while self.tx_sync.is_set():
- readings.append([time.gmtime() - start_time, self.tx.current, self.rx.voltage])
- return np.array(readings)
+ _readings.append([time.gmtime() - start_time, self.tx.current, self.rx.voltage])
+ return np.array(_readings)
if polarity is not None and polarity != self.tx.polarity:
self.tx.polarity = polarity
diff --git a/test_ohmpi_card_3_15.py b/test_ohmpi_card_3_15.py
index bbceaad4094cf853eaba6901a74641febce4a861..e4e10683f8d5e75f9bc8d5f2532fc29e4f378801 100644
--- a/test_ohmpi_card_3_15.py
+++ b/test_ohmpi_card_3_15.py
@@ -28,3 +28,11 @@ r = np.array(r)
print(f'Mean resistance: {np.mean(r):.3f} Ohms')
print(f'Resistance std: {np.std(r):.3f} Ohms')
print(f'Dev. {100. * np.std(r)/np.mean(r):.1} %')
+
+from OhmPi.measure import OhmPiHardware
+from utils import change_config
+
+change_config('config_ohmpi_card_3_15.py')
+k = OhmPiHardware()
+k._vab_pulse(vab=12, length=2., polarity=1)
+change_config('config_default.py')
\ No newline at end of file
diff --git a/utils.py b/utils.py
index 6f5596322f4730fd5f5f02a843d88bdc116e2b6c..86e740b9f74506893292a51ebc40b1ea925c7b52 100644
--- a/utils.py
+++ b/utils.py
@@ -1,5 +1,6 @@
import io
-
+import os
+import shutil
def get_platform():
"""Gets platform name and checks if it is a raspberry pi
@@ -17,4 +18,12 @@ def get_platform():
on_pi = True
except FileNotFoundError:
pass
- return platform, on_pi
\ No newline at end of file
+ return platform, on_pi
+
+def change_config(config_file):
+ cwd = os.getcwd()
+ try:
+ shutil.copyfile(f'{cwd}/OhmPi/config.py', f'{cwd}/OhmPi/config_tmp.py')
+ shutil.copyfile(f'{cwd}/OhmPi/{config_file}', f'{cwd}/OhmPi/config.py')
+ except Exception as error:
+ print(f'Could not change config file to {cwd}/OhmPi/{config_file}:\n{error}')
\ No newline at end of file