diff --git a/.dev/test_contact_resistance_board.py b/.dev/test_contact_resistance_board.py
index 915e2abf83fd5c3b5974d778c867b68e99781ac9..eac4c6c7b35781619feec20d4271d82a13b946f6 100644
--- a/.dev/test_contact_resistance_board.py
+++ b/.dev/test_contact_resistance_board.py
@@ -11,10 +11,11 @@ k = OhmPi()
# Set or load sequence
sequence = np.array([np.array([1,2,3,4])+k for k in range(29)]) # [[1,2,3,4],[2,3,4,5]...] but can actually make other combinations of AB to increase number of contact resistance tested
sequence = np.vstack([sequence,np.array([[30,31,1,2],[31,32,2,3]])])
+sequence = sequence[-4:]
k.sequence = contact_resistance_test_board(sequence) # checks if sequence contains potential shortcut quads (AB odd odd or even even)
# Run contact resistance check
k.rs_check()
# Run sequence
-k.run_sequence(strategy='vmax',vab="5.", vab_max='30', nb_stack=2, injection_duration=.5, duty_cycle=1.)
+k.run_sequence(strategy='vmax',vab=2., vab_max=5, nb_stack=2, injection_duration=.5, duty_cycle=1.)
diff --git a/ohmpi/config.py b/ohmpi/config.py
deleted file mode 100644
index dccaa416caf9428432c5d3ffce3f44fc87b8a158..0000000000000000000000000000000000000000
--- a/ohmpi/config.py
+++ /dev/null
@@ -1,133 +0,0 @@
-import logging
-from ohmpi.utils import get_platform
-from paho.mqtt.client import MQTTv31 # noqa
-
-_, on_pi = get_platform()
-# DEFINE THE ID OF YOUR OhmPi
-ohmpi_id = '0001' if on_pi else 'XXXX'
-# DEFINE YOUR MQTT BROKER (DEFAULT: 'localhost')
-mqtt_broker = 'localhost' if on_pi else 'NAME_YOUR_BROKER_WHEN_IN_SIMULATION_MODE_HERE'
-# DEFINE THE SUFFIX TO ADD TO YOUR LOGS FILES
-logging_suffix = ''
-
-# OhmPi configuration
-OHMPI_CONFIG = {
- 'id': ohmpi_id, # Unique identifier of the OhmPi board (string)
- 'settings': 'settings/default.json', # INSERT YOUR FAVORITE SETTINGS FILE HERE
-}
-
-r_shunt = 2.
-HARDWARE_CONFIG = {
- 'ctl': {'model': 'raspberry_pi'},
- 'pwr': {'model': 'pwr_dps5005', 'voltage': 3., 'interface_name': 'modbus'},
- 'tx': {'model': 'mb_2024_0_2',
- 'voltage_max': 50., # Maximum voltage supported by the TX board [V]
- 'current_max': 4.80/(50*r_shunt), # Maximum voltage read by the current ADC on the TX board [A]
- 'r_shunt': r_shunt, # Shunt resistance in Ohms
- 'interface_name': 'i2c'
- },
- 'rx': {'model': 'mb_2024_0_2',
- 'latency': 0.010, # latency in seconds in continuous mode
- 'sampling_rate': 200, # number of samples per second
- 'interface_name': 'i2c',
- },
- 'mux': {'boards':
- {'mux_A':
- {'model': 'mux_2023_0_X',
- 'mux_tca_address': 0x70,
- 'roles': 'A',
- 'electrodes': range(1, 65)},
- 'mux_B':
- {'model': 'mux_2023_0_X',
- 'mux_tca_address': 0x71,
- 'roles': 'B',
- 'electrodes': range(1, 65)},
- 'mux_M':
- {'model': 'mux_2023_0_X',
- 'mux_tca_address': 0x72,
- 'roles': 'M',
- 'electrodes': range(1, 65)},
- 'mux_N':
- {'model': 'mux_2023_0_X',
- 'mux_tca_address': 0x73,
- 'roles': 'N',
- 'electrodes': range(1, 65),
- }
- },
- 'default': {'interface_name': 'i2c',
- 'voltage_max': 50.,
- 'current_max': 3.}
- }
-}
-# SET THE LOGGING LEVELS, MQTT BROKERS AND MQTT OPTIONS ACCORDING TO YOUR NEEDS
-# Execution logging configuration
-EXEC_LOGGING_CONFIG = {
- 'logging_level': logging.INFO,
- 'log_file_logging_level': logging.INFO,
- 'logging_to_console': True,
- 'file_name': f'exec{logging_suffix}.log',
- 'max_bytes': 2097152,
- 'backup_count': 30,
- 'when': 'd',
- 'interval': 1
-}
-
-# Data logging configuration
-DATA_LOGGING_CONFIG = {
- 'logging_level': logging.INFO,
- 'logging_to_console': True,
- 'file_name': f'data{logging_suffix}.log',
- 'max_bytes': 16777216,
- 'backup_count': 1024,
- 'when': 'd',
- 'interval': 1
-}
-
-# State of Health logging configuration (For a future release)
-SOH_LOGGING_CONFIG = {
- 'logging_level': logging.INFO,
- 'logging_to_console': True,
- 'log_file_logging_level': logging.DEBUG,
- 'file_name': f'soh{logging_suffix}.log',
- 'max_bytes': 16777216,
- 'backup_count': 1024,
- 'when': 'd',
- 'interval': 1
-}
-
-# MQTT logging configuration parameters
-MQTT_LOGGING_CONFIG = {
- 'hostname': mqtt_broker,
- 'port': 1883,
- 'qos': 2,
- 'retain': False,
- 'keepalive': 60,
- 'will': None,
- 'auth': {'username': 'mqtt_user', 'password': 'mqtt_password'},
- 'tls': None,
- 'protocol': MQTTv31,
- 'transport': 'tcp',
- 'client_id': f'{OHMPI_CONFIG["id"]}',
- 'exec_topic': f'ohmpi_{OHMPI_CONFIG["id"]}/exec',
- 'exec_logging_level': EXEC_LOGGING_CONFIG['logging_level'],
- 'data_topic': f'ohmpi_{OHMPI_CONFIG["id"]}/data',
- 'data_logging_level': DATA_LOGGING_CONFIG['logging_level'],
- 'soh_topic': f'ohmpi_{OHMPI_CONFIG["id"]}/soh',
- 'soh_logging_level': SOH_LOGGING_CONFIG['logging_level']
-}
-
-# MQTT control configuration parameters
-MQTT_CONTROL_CONFIG = {
- 'hostname': mqtt_broker,
- 'port': 1883,
- 'qos': 2,
- 'retain': False,
- 'keepalive': 60,
- 'will': None,
- 'auth': {'username': 'mqtt_user', 'password': 'mqtt_password'},
- 'tls': None,
- 'protocol': MQTTv31,
- 'transport': 'tcp',
- 'client_id': f'{OHMPI_CONFIG["id"]}',
- 'ctrl_topic': f'ohmpi_{OHMPI_CONFIG["id"]}/ctrl'
-}