# -*- coding: utf-8 -*-
"""
created on January 6, 2020.
Updates dec 2022.
Hardware: Licensed under CERN-OHL-S v2 or any later version
Software: Licensed under the GNU General Public License v3.0
Ohmpi.py is a program to control a low-cost and open hardware resistivity meter OhmPi that is developed by
Rémi CLEMENT (INRAE), Vivien DUBOIS (INRAE), Hélène GUYARD (IGE), Nicolas FORQUET (INRAE), Yannick FARGIER (IFSTTAR)
Olivier KAUFMANN (UMONS), Arnaud WATLET (UMONS) and Guillaume BLANCHY (FNRS/ULiege).
"""
import os
from OhmPi.utils import get_platform
import json
import warnings
from copy import deepcopy
import numpy as np
import csv
import time
import shutil
from datetime import datetime
from termcolor import colored
import threading
from OhmPi.logging_setup import setup_loggers
from OhmPi.config import MQTT_CONTROL_CONFIG, OHMPI_CONFIG, EXEC_LOGGING_CONFIG
from logging import DEBUG
from measure import OhmPiHardware
# finish import (done only when class is instantiated as some libs are only available on arm64 platform)
try:
arm64_imports = True
except ImportError as error:
if EXEC_LOGGING_CONFIG['logging_level'] == DEBUG:
print(colored(f'Import error: {error}', 'yellow'))
arm64_imports = False
except Exception as error:
print(colored(f'Unexpected error: {error}', 'red'))
arm64_imports = None
class OhmPi(object):
""" OhmPi class.
"""
def __init__(self, settings=None, sequence=None, mqtt=True, onpi=None):
"""Constructs the ohmpi object
Parameters
----------
settings:
sequence:
mqtt: bool, defaut: True
if True publish on mqtt topics while logging, otherwise use other loggers only
onpi: bool,None default: None
if None, the platform on which the class is instantiated is determined to set on_pi to either True or False.
if False the behaviour of an ohmpi will be partially emulated and return random data.
"""
if onpi is None:
_, onpi = get_platform()
elif onpi:
assert get_platform()[1] == True # Checks that the system actually runs on a pi if onpi is True
self.on_pi = onpi # True if run from the RaspberryPi with the hardware, otherwise False for random data
self._sequence = sequence
self.nb_samples = 0
self.status = 'idle' # either running or idle
self.thread = None # contains the handle for the thread taking the measurement
# set loggers
config_exec_logger, _, config_data_logger, _, config_soh_logger, _, _, msg = setup_loggers(mqtt=mqtt)
self.exec_logger = config_exec_logger
self.soh_logger = config_soh_logger
print(msg)
# read in hardware parameters (config.py)
self._hw = OhmPiHardware({'exec_logger': self.exec_logger, 'data_logger': self.data_logger,
'soh_logger': self.soh_logger})
self.exec_logger.info('Hardware configured...')
# default acquisition settings
self.settings = {
'injection_duration': 0.2,
'nb_meas': 1,
'sequence_delay': 1,
'nb_stack': 1,
'export_path': 'data/measurement.csv'
}
# read in acquisition settings
if settings is not None:
self.update_settings(settings)
self.exec_logger.debug('Initialized with settings:' + str(self.settings))
# read quadrupole sequence
if sequence is not None:
self.load_sequence(sequence)
# set controller
self.mqtt = mqtt
self.cmd_id = None
if self.mqtt:
import paho.mqtt.client as mqtt_client
self.exec_logger.debug(f"Connecting to control topic {MQTT_CONTROL_CONFIG['ctrl_topic']}"
f" on {MQTT_CONTROL_CONFIG['hostname']} broker")
def connect_mqtt() -> mqtt_client:
def on_connect(mqttclient, userdata, flags, rc):
if rc == 0:
self.exec_logger.debug(f"Successfully connected to control broker:"
f" {MQTT_CONTROL_CONFIG['hostname']}")
else:
self.exec_logger.warning(f'Failed to connect to control broker. Return code : {rc}')
client = mqtt_client.Client(f"ohmpi_{OHMPI_CONFIG['id']}_listener", clean_session=False)
client.username_pw_set(MQTT_CONTROL_CONFIG['auth'].get('username'),
MQTT_CONTROL_CONFIG['auth']['password'])
client.on_connect = on_connect
client.connect(MQTT_CONTROL_CONFIG['hostname'], MQTT_CONTROL_CONFIG['port'])
return client
try:
self.exec_logger.debug(f"Connecting to control broker: {MQTT_CONTROL_CONFIG['hostname']}")
self.controller = connect_mqtt()
except Exception as e:
self.exec_logger.debug(f'Unable to connect control broker: {e}')
self.controller = None
if self.controller is not None:
self.exec_logger.debug(f"Subscribing to control topic {MQTT_CONTROL_CONFIG['ctrl_topic']}")
try:
self.controller.subscribe(MQTT_CONTROL_CONFIG['ctrl_topic'], MQTT_CONTROL_CONFIG['qos'])
msg = f"Subscribed to control topic {MQTT_CONTROL_CONFIG['ctrl_topic']}" \
f" on {MQTT_CONTROL_CONFIG['hostname']} broker"
self.exec_logger.debug(msg)
print(colored(f'\u2611 {msg}', 'blue'))
except Exception as e:
self.exec_logger.warning(f'Unable to subscribe to control topic : {e}')
self.controller = None
publisher_config = MQTT_CONTROL_CONFIG.copy()
publisher_config['topic'] = MQTT_CONTROL_CONFIG['ctrl_topic']
publisher_config.pop('ctrl_topic')
def on_message(client, userdata, message):
command = message.payload.decode('utf-8')
self.exec_logger.debug(f'Received command {command}')
self._process_commands(command)
self.controller.on_message = on_message
else:
self.controller = None
self.exec_logger.warning('No connection to control broker.'
' Use python/ipython to interact with OhmPi object...')
@staticmethod
def append_and_save(filename: str, last_measurement: dict, cmd_id=None):
"""Appends and saves the last measurement dict.
Parameters
----------
filename : str
filename to save the last measurement dataframe
last_measurement : dict
Last measurement taken in the form of a python dictionary
cmd_id : str, optional
Unique command identifier
"""
last_measurement = deepcopy(last_measurement)
if 'fulldata' in last_measurement:
d = last_measurement['fulldata']
n = d.shape[0]
if n > 1:
idic = dict(zip(['i' + str(i) for i in range(n)], d[:, 0]))
udic = dict(zip(['u' + str(i) for i in range(n)], d[:, 1]))
tdic = dict(zip(['t' + str(i) for i in range(n)], d[:, 2]))
last_measurement.update(idic)
last_measurement.update(udic)
last_measurement.update(tdic)
last_measurement.pop('fulldata')
if os.path.isfile(filename):
# Load data file and append data to it
with open(filename, 'a') as f:
w = csv.DictWriter(f, last_measurement.keys())
w.writerow(last_measurement)
# last_measurement.to_csv(f, header=False)
else:
# create data file and add headers
with open(filename, 'a') as f:
w = csv.DictWriter(f, last_measurement.keys())
w.writeheader()
w.writerow(last_measurement)
@staticmethod
def _find_identical_in_line(quads):
"""Finds quadrupole where A and B are identical.
If A and B are connected to the same electrode, the Pi burns (short-circuit).
Parameters
----------
quads : numpy.ndarray
List of quadrupoles of shape nquad x 4 or 1D vector of shape nquad.
Returns
-------
output : numpy.ndarray 1D array of int
List of index of rows where A and B are identical.
"""
# if we have a 1D array (so only 1 quadrupole), make it a 2D array
if len(quads.shape) == 1:
quads = quads[None, :]
output = np.where(quads[:, 0] == quads[:, 1])[0]
return output
def get_data(self, survey_names=None, cmd_id=None):
"""Get available data.
Parameters
----------
survey_names : list of str, optional
List of filenames already available from the html interface. So
their content won't be returned again. Only files not in the list
will be read.
cmd_id : str, optional
Unique command identifier
"""
# get all .csv file in data folder
if survey_names is None:
survey_names = []
fnames = [fname for fname in os.listdir('data/') if fname[-4:] == '.csv']
ddic = {}
if cmd_id is None:
cmd_id = 'unknown'
for fname in fnames:
if ((fname != 'readme.txt')
and ('_rs' not in fname)
and (fname.replace('.csv', '') not in survey_names)):
try:
data = np.loadtxt('data/' + fname, delimiter=',',
skiprows=1, usecols=(1, 2, 3, 4, 8))
data = data[None, :] if len(data.shape) == 1 else data
ddic[fname.replace('.csv', '')] = {
'a': data[:, 0].astype(int).tolist(),
'b': data[:, 1].astype(int).tolist(),
'm': data[:, 2].astype(int).tolist(),
'n': data[:, 3].astype(int).tolist(),
'rho': data[:, 4].tolist(),
}
except Exception as e:
print(fname, ':', e)
rdic = {'cmd_id': cmd_id, 'data': ddic}
self.data_logger.info(json.dumps(rdic))
return ddic
def interrupt(self, cmd_id=None):
"""Interrupts the acquisition
Parameters
----------
cmd_id : str, optional
Unique command identifier
"""
self.status = 'stopping'
if self.thread is not None:
self.thread.join()
self.exec_logger.debug('Interrupted sequence acquisition...')
else:
self.exec_logger.debug('No sequence measurement thread to interrupt.')
self.exec_logger.debug(f'Status: {self.status}')
def load_sequence(self, filename: str, cmd_id=None):
"""Reads quadrupole sequence from file.
Parameters
----------
filename : str
Path of the .csv or .txt file with A, B, M and N electrodes.
Electrode index start at 1.
cmd_id : str, optional
Unique command identifier
Returns
-------
sequence : numpy.array
Array of shape (number quadrupoles * 4).
"""
self.exec_logger.debug(f'Loading sequence {filename}')
sequence = np.loadtxt(filename, delimiter=" ", dtype=np.uint32) # load quadrupole file
if sequence is not None:
self.exec_logger.debug(f'Sequence of {sequence.shape[0]:d} quadrupoles read.')
# locate lines where the electrode index exceeds the maximum number of electrodes
test_index_elec = np.array(np.where(sequence > self.max_elec))
# locate lines where electrode A == electrode B
test_same_elec = self._find_identical_in_line(sequence)
# if statement with exit cases (TODO rajouter un else if pour le deuxième cas du ticket #2)
if test_index_elec.size != 0:
for i in range(len(test_index_elec[0, :])):
self.exec_logger.error(f'An electrode index at line {str(test_index_elec[0, i] + 1)} '
f'exceeds the maximum number of electrodes')
# sys.exit(1)
sequence = None
elif len(test_same_elec) != 0:
for i in range(len(test_same_elec)):
self.exec_logger.error(f'An electrode index A == B detected at line {str(test_same_elec[i] + 1)}')
# sys.exit(1)
sequence = None
if sequence is not None:
self.exec_logger.info(f'Sequence {filename} of {sequence.shape[0]:d} quadrupoles loaded.')
else:
self.exec_logger.warning(f'Unable to load sequence {filename}')
self.sequence = sequence
def measure(self, **kwargs):
warnings.warn('This function is deprecated. Use run_multiple_sequences() instead.', DeprecationWarning)
self.run_multiple_sequences(**kwargs)
def _process_commands(self, message: str):
"""Processes commands received from the controller(s)
Parameters
----------
message : str
message containing a command and arguments or keywords and arguments
"""
status = False
cmd_id = '?'
try:
decoded_message = json.loads(message)
self.exec_logger.debug(f'Decoded message {decoded_message}')
cmd_id = decoded_message.pop('cmd_id', None)
cmd = decoded_message.pop('cmd', None)
# args = decoded_message.pop('args', None)
# if args is not None:
# if len(args) != 0:
# if args[0] != '[':
# args = f'["{args}"]'
# self.exec_logger.debug(f'args to decode: {args}')
# args = json.loads(args) if args != '[]' else None
# self.exec_logger.debug(f'Decoded args {args}')
# else:
# args = None
kwargs = decoded_message.pop('kwargs', None)
# if kwargs is not None:
# if len(kwargs) != 0:
# if kwargs[0] != '{':
# kwargs = '{"' + kwargs + '"}'
# self.exec_logger.debug(f'kwargs to decode: {kwargs}')
# kwargs = json.loads(kwargs) if kwargs != '' else None
# self.exec_logger.debug(f'Decoded kwargs {kwargs}')
# else:
# kwargs = None
self.exec_logger.debug(f"Calling method {cmd}({str(kwargs) if kwargs is not None else ''})")
# self.exec_logger.debug(f"Calling method {cmd}({str(args) + ', ' if args is not None else ''}"
# f"{str(kwargs) if kwargs is not None else ''})")
if cmd_id is None:
self.exec_logger.warning('You should use a unique identifier for cmd_id')
if cmd is not None:
try:
# if args is None:
# if kwargs is None:
# output = getattr(self, cmd)()
# else:
# output = getattr(self, cmd)(**kwargs)
# else:
if kwargs is None:
output = getattr(self, cmd)()
else:
output = getattr(self, cmd)(**kwargs)
status = True
except Exception as e:
self.exec_logger.error(
f"Unable to execute {cmd}({str(kwargs) if kwargs is not None else ''}): {e}")
status = False
except Exception as e:
self.exec_logger.warning(f'Unable to decode command {message}: {e}')
status = False
finally:
reply = {'cmd_id': cmd_id, 'status': status}
reply = json.dumps(reply)
self.exec_logger.debug(f'Execution report: {reply}')
def quit(self, cmd_id=None):
"""Quits OhmPi
Parameters
----------
cmd_id : str, optional
Unique command identifier
"""
self.exec_logger.debug(f'Quitting ohmpi.py following command {cmd_id}')
exit()
def _read_hardware_config(self):
"""Reads hardware configuration from config.py
"""
self.exec_logger.debug('Getting hardware config')
self.id = OHMPI_CONFIG['id'] # ID of the OhmPi
self.r_shunt = OHMPI_CONFIG['R_shunt'] # reference resistance value in ohm
self.Imax = OHMPI_CONFIG['Imax'] # maximum current
self.exec_logger.debug(f'The maximum current cannot be higher than {self.Imax} mA')
self.coef_p2 = OHMPI_CONFIG['coef_p2'] # slope for current conversion for ads.P2, measurement in V/V
self.nb_samples = OHMPI_CONFIG['nb_samples'] # number of samples measured for each stack
self.version = OHMPI_CONFIG['version'] # hardware version
self.max_elec = OHMPI_CONFIG['max_elec'] # maximum number of electrodes
self.board_addresses = OHMPI_CONFIG['board_addresses']
self.board_version = OHMPI_CONFIG['board_version']
self.mcp_board_address = OHMPI_CONFIG['mcp_board_address']
self.exec_logger.debug(f'OHMPI_CONFIG = {str(OHMPI_CONFIG)}')
def read_quad(self, **kwargs):
warnings.warn('This function is deprecated. Use load_sequence instead.', DeprecationWarning)
self.load_sequence(**kwargs)
def remove_data(self, cmd_id=None):
"""Remove all data in the data folder
Parameters
----------
cmd_id : str, optional
Unique command identifier
"""
self.exec_logger.debug(f'Removing all data following command {cmd_id}')
shutil.rmtree('data')
os.mkdir('data')
def restart(self, cmd_id=None):
"""Restarts the Raspberry Pi
Parameters
----------
cmd_id : str, optional
Unique command identifier
"""
if self.on_pi:
self.exec_logger.info(f'Restarting pi following command {cmd_id}...')
os.system('reboot')
else:
self.exec_logger.warning('Not on Raspberry Pi, skipping reboot...')
def run_measurement(self, quad=None, nb_stack=None, injection_duration=None,
autogain=True, strategy='constant', tx_volt=5., best_tx_injtime=0.1,
cmd_id=None):
"""Measures on a quadrupole and returns transfer resistance.
Parameters
----------
quad : iterable (list of int)
Quadrupole to measure, just for labelling. Only switch_mux_on/off
really create the route to the electrodes.
nb_stack : int, optional
Number of stacks. A stack is considered two half-cycles (one
positive, one negative).
injection_duration : int, optional
Injection time in seconds.
autogain : bool, optional
If True, will adapt the gain of the ADS1115 to maximize the
resolution of the reading.
strategy : str, optional
(V3.0 only) If we search for best voltage (tx_volt == 0), we can choose
vmax strategy : find the highest voltage that stays in the range
For a constant value, just set the tx_volt.
tx_volt : float, optional
(V3.0 only) If specified, voltage will be imposed. If 0, we will look
for the best voltage. If the best Tx cannot be found, no
measurement will be taken and values will be NaN.
best_tx_injtime : float, optional
(V3.0 only) Injection time in seconds used for finding the best voltage.
cmd_id : str, optional
Unique command identifier
"""
self.exec_logger.debug('Starting measurement')
self.exec_logger.debug('Waiting for data')
# check arguments
if quad is None:
quad = [0, 0, 0, 0]
if self.on_pi: # TODO : Remove this condition?
if nb_stack is None:
nb_stack = self.settings['nb_stack']
if injection_duration is None:
injection_duration = self.settings['injection_duration']
tx_volt = float(tx_volt)
# inner variable initialization
sum_i = 0
sum_vmn = 0
sum_ps = 0
# # let's define the pin again as if we run through measure()
# # as it's run in another thread, it doesn't consider these
# # and this can lead to short circuit!
#
# self.pin0 = self.mcp_board.get_pin(0)
# self.pin0.direction = Direction.OUTPUT
# self.pin0.value = False
# self.pin1 = self.mcp_board.get_pin(1)
# self.pin1.direction = Direction.OUTPUT
# self.pin1.value = False
# self.pin7 = self.mcp_board.get_pin(7) #IHM on mesaurement
# self.pin7.direction = Direction.OUTPUT
# self.pin7.value = False
# if self.sequence is None:
# if self.idps:
#
# # self.switch_dps('on')
# self.pin2 = self.mcp_board.get_pin(2) # dsp +
# self.pin2.direction = Direction.OUTPUT
# self.pin2.value = True
# self.pin3 = self.mcp_board.get_pin(3) # dsp -
# self.pin3.direction = Direction.OUTPUT
# self.pin3.value = True
# time.sleep(4)
#
# self.pin5 = self.mcp_board.get_pin(5) #IHM on mesaurement
# self.pin5.direction = Direction.OUTPUT
# self.pin5.value = True
# self.pin6 = self.mcp_board.get_pin(6) #IHM on mesaurement
# self.pin6.direction = Direction.OUTPUT
# self.pin6.value = False
# self.pin7 = self.mcp_board.get_pin(7) #IHM on mesaurement
# self.pin7.direction = Direction.OUTPUT
# self.pin7.value = False
# if self.idps:
# if self.DPS.read_register(0x05,2) < 11:
# self.pin7.value = True# max current allowed (100 mA for relays) #voltage
#
# # get best voltage to inject AND polarity
# if self.idps:
# tx_volt, polarity, Rab = self._compute_tx_volt(
# best_tx_injtime=best_tx_injtime, strategy=strategy, tx_volt=tx_volt)
# self.exec_logger.debug(f'Best VAB found is {tx_volt:.3f}V')
# else:
# polarity = 1
# Rab = None
#
# # first reset the gain to 2/3 before trying to find best gain (mode 0 is continuous)
# self.ads_current = ads.ADS1115(self.i2c, gain=2 / 3, data_rate=860,
# address=self.ads_current_address, mode=0)
# self.ads_voltage = ads.ADS1115(self.i2c, gain=2 / 3, data_rate=860,
# address=self.ads_voltage_address, mode=0)
# # turn on the power supply
# start_delay = None
# end_delay = None
# out_of_range = False
# if self.idps:
# if not np.isnan(tx_volt):
# self.DPS.write_register(0x0000, tx_volt, 2) # set tx voltage in V
# self.DPS.write_register(0x09, 1) # DPS5005 on
# time.sleep(0.3)
# else:
# self.exec_logger.debug('No best voltage found, will not take measurement')
# out_of_range = True
#
# if not out_of_range: # we found a Vab in the range so we measure
# if autogain:
#
# # compute autogain
# gain_voltage = []
# for n in [0,1]: # make short cycle for gain computation
# self.ads_voltage = ads.ADS1115(self.i2c, gain=2 / 3, data_rate=860,
# address=self.ads_voltage_address, mode=0)
# if n == 0:
# self.pin0.value = True
# self.pin1.value = False
# if self.board_version == 'mb.2023.0.0':
# self.pin6.value = True # IHM current injection led on
# else:
# self.pin0.value = False
# self.pin1.value = True # current injection nr2
# if self.board_version == 'mb.2023.0.0':
# self.pin6.value = True # IHM current injection led on
#
# time.sleep(injection_duration)
# gain_current = self._gain_auto(AnalogIn(self.ads_current, ads.P0))
#
# if polarity > 0:
# if n == 0:
# gain_voltage.append(self._gain_auto(AnalogIn(self.ads_voltage, ads.P0)))
# else:
# gain_voltage.append(self._gain_auto(AnalogIn(self.ads_voltage, ads.P2)))
# else:
# if n == 0:
# gain_voltage.append(self._gain_auto(AnalogIn(self.ads_voltage, ads.P2)))
# else:
# gain_voltage.append(self._gain_auto(AnalogIn(self.ads_voltage, ads.P0)))
#
# self.pin0.value = False
# self.pin1.value = False
# time.sleep(injection_duration)
# if n == 0:
# gain_voltage.append(self._gain_auto(AnalogIn(self.ads_voltage, ads.P0)))
# else:
# gain_voltage.append(self._gain_auto(AnalogIn(self.ads_voltage, ads.P2)))
# if self.board_version == 'mb.2023.0.0':
# self.pin6.value = False # IHM current injection led off
#
# self.exec_logger.debug(f'Gain current: {gain_current:.3f}, gain voltage: {gain_voltage[0]:.3f}, '
# f'{gain_voltage[1]:.3f}')
# self.ads_current = ads.ADS1115(self.i2c, gain=gain_current, data_rate=860,
# address=self.ads_current_address, mode=0)
#
# self.pin0.value = False
# self.pin1.value = False
#
# # one stack = 2 half-cycles (one positive, one negative)
# pinMN = 0 if polarity > 0 else 2 # noqa
#
# # sampling for each stack at the end of the injection
# sampling_interval = 10 # ms # TODO: make this a config option
# self.nb_samples = int(injection_duration * 1000 // sampling_interval) + 1 #TODO: check this strategy
#
# # full data for waveform
# fulldata = []
#
# # we sample every 10 ms (as using AnalogIn for both current
# # and voltage takes about 7 ms). When we go over the injection
# # duration, we break the loop and truncate the meas arrays
# # only the last values in meas will be taken into account
# start_time = time.time() # start counter
# for n in range(0, nb_stack * 2): # for each half-cycles
# # current injection
# if (n % 2) == 0:
# self.pin0.value = True
# self.pin1.value = False
# if autogain: # select gain computed on first half cycle
# self.ads_voltage = ads.ADS1115(self.i2c, gain=np.min(gain_voltage), data_rate=860,
# address=self.ads_voltage_address, mode=0)
# else:
# self.pin0.value = False
# self.pin1.value = True # current injection nr2
# if autogain: # select gain computed on first half cycle
# self.ads_voltage = ads.ADS1115(self.i2c, gain=np.min(gain_voltage),data_rate=860,
# address=self.ads_voltage_address, mode=0)
# self.exec_logger.debug(f'Stack {n} {self.pin0.value} {self.pin1.value}')
# if self.board_version == 'mb.2023.0.0':
# self.pin6.value = True # IHM current injection led on
# # measurement of current i and voltage u during injection
# meas = np.zeros((self.nb_samples, 3)) * np.nan
# start_delay = time.time() # stating measurement time
# dt = 0
# k = 0
# for k in range(0, self.nb_samples):
# # reading current value on ADS channels
# meas[k, 0] = (AnalogIn(self.ads_current, ads.P0).voltage * 1000) / (50 * self.r_shunt)
# if self.board_version == 'mb.2023.0.0':
# if pinMN == 0:
# meas[k, 1] = AnalogIn(self.ads_voltage, ads.P0).voltage * 1000
# else:
# meas[k, 1] = -AnalogIn(self.ads_voltage, ads.P2).voltage * 1000
# elif self.board_version == '22.10':
# meas[k, 1] = -AnalogIn(self.ads_voltage, ads.P0, ads.P1).voltage * self.coef_p2 * 1000
# # else:
# # self.exec_logger.debug('Unknown board')
# time.sleep(sampling_interval / 1000)
# dt = time.time() - start_delay # real injection time (s)
# meas[k, 2] = time.time() - start_time
# if dt > (injection_duration - 0 * sampling_interval / 1000.):
# break
#
# # stop current injection
# self.pin0.value = False
# self.pin1.value = False
# # if autogain: # select gain computed on first half cycle
# # self.ads_voltage = ads.ADS1115(self.i2c, gain=gain_voltage[2],data_rate=860,
# # address=self.ads_voltage_address, mode=0)
# self.pin6.value = False# IHM current injection led on
# end_delay = time.time()
#
# # truncate the meas array if we didn't fill the last samples #TODO: check why
# meas = meas[:k + 1]
#
# # measurement of current i and voltage u during off time
# measpp = np.zeros((meas.shape[0], 3)) * np.nan
# start_delay = time.time() # stating measurement time
# dt = 0
# for k in range(0, measpp.shape[0]):
# # reading current value on ADS channels
# measpp[k, 0] = (AnalogIn(self.ads_current, ads.P0).voltage * 1000.) / (50 * self.r_shunt)
# if self.board_version == 'mb.2023.0.0':
# if pinMN == 0:
# measpp[k, 1] = AnalogIn(self.ads_voltage, ads.P0).voltage * 1000.
# else:
# measpp[k, 1] = AnalogIn(self.ads_voltage, ads.P2).voltage * 1000. * -1
# elif self.board_version == '22.10':
# measpp[k, 1] = -AnalogIn(self.ads_voltage, ads.P0, ads.P1).voltage * self.coef_p2 * 1000.
# else:
# self.exec_logger.debug('unknown board')
# time.sleep(sampling_interval / 1000)
# dt = time.time() - start_delay # real injection time (s)
# measpp[k, 2] = time.time() - start_time
# if dt > (injection_duration - 0 * sampling_interval / 1000.):
# break
#
# end_delay = time.time()
#
# # truncate the meas array if we didn't fill the last samples
# measpp = measpp[:k + 1]
#
# # we alternate on which ADS1115 pin we measure because of sign of voltage
# if pinMN == 0:
# pinMN = 2 # noqa
# else:
# pinMN = 0 # noqa
#
# # store data for full wave form
# fulldata.append(meas)
# fulldata.append(measpp)
#
# # TODO get battery voltage and warn if battery is running low
# # TODO send a message on SOH stating the battery level
#
# # let's do some calculation (out of the stacking loop)
#
# # i_stack = np.empty(2 * nb_stack, dtype=object)
# # vmn_stack = np.empty(2 * nb_stack, dtype=object)
# i_stack, vmn_stack = [], []
# # select appropriate window length to average the readings
# window = int(np.min([f.shape[0] for f in fulldata[::2]]) // 3)
# for n, meas in enumerate(fulldata[::2]):
# # take average from the samples per stack, then sum them all
# # average for the last third of the stacked values
# # is done outside the loop
# i_stack.append(meas[-int(window):, 0])
# vmn_stack.append(meas[-int(window):, 1])
#
# sum_i = sum_i + (np.mean(meas[-int(meas.shape[0] // 3):, 0]))
# vmn1 = np.mean(meas[-int(meas.shape[0] // 3), 1])
# if (n % 2) == 0:
# sum_vmn = sum_vmn - vmn1
# sum_ps = sum_ps + vmn1
# else:
# sum_vmn = sum_vmn + vmn1
# sum_ps = sum_ps + vmn1
#
# else:
# sum_i = np.nan
# sum_vmn = np.nan
# sum_ps = np.nan
# fulldata = None
#
# if self.idps:
# self.DPS.write_register(0x0000, 0, 2) # reset to 0 volt
# self.DPS.write_register(0x09, 0) # DPS5005 off
#
# # reshape full data to an array of good size
# # we need an array of regular size to save in the csv
# if not out_of_range:
# fulldata = np.vstack(fulldata)
# # we create a big enough array given nb_samples, number of
# # half-cycles (1 stack = 2 half-cycles), and twice as we
# # measure decay as well
# a = np.zeros((nb_stack * self.nb_samples * 2 * 2, 3)) * np.nan
# a[:fulldata.shape[0], :] = fulldata
# fulldata = a
# else:
# np.array([[]])
#
# vmn_stack_mean = np.mean([np.diff(np.mean(vmn_stack[i*2:i*2+2], axis=1)) / 2 for i in range(nb_stack)])
# vmn_std =np.sqrt(np.std(vmn_stack[::2])**2 + np.std(vmn_stack[1::2])**2) # np.sum([np.std(vmn_stack[::2]),np.std(vmn_stack[1::2])])
# i_stack_mean = np.mean(i_stack)
# i_std = np.mean(np.array([np.std(i_stack[::2]), np.std(i_stack[1::2])]))
# r_stack_mean = vmn_stack_mean / i_stack_mean
# r_stack_std = np.sqrt((vmn_std/vmn_stack_mean)**2 + (i_std/i_stack_mean)**2) * r_stack_mean
# ps_stack_mean = np.mean(np.array([np.mean(np.mean(vmn_stack[i * 2:i * 2 + 2], axis=1)) for i in range(nb_stack)]))
# create a dictionary and compute averaged values from all stacks
# if self.board_version == 'mb.2023.0.0':
d = {
"time": datetime.now().isoformat(),
"A": quad[0],
"B": quad[1],
"M": quad[2],
"N": quad[3],
"inj time [ms]": (end_delay - start_delay) * 1000. if not out_of_range else 0.,
"Vmn [mV]": sum_vmn / (2 * nb_stack),
"I [mA]": sum_i / (2 * nb_stack),
"R [ohm]": sum_vmn / sum_i,
"Ps [mV]": sum_ps / (2 * nb_stack),
"nbStack": nb_stack,
"Tx [V]": tx_volt if not out_of_range else 0.,
"CPU temp [degC]": self._hw.cpu_temperature,
"Nb samples [-]": self.nb_samples,
"fulldata": fulldata,
"I_stack [mA]": i_stack_mean,
"I_std [mA]": i_std,
"I_per_stack [mA]": np.array([np.mean(i_stack[i*2:i*2+2]) for i in range(nb_stack)]),
"Vmn_stack [mV]": vmn_stack_mean,
"Vmn_std [mV]": vmn_std,
"Vmn_per_stack [mV]": np.array([np.diff(np.mean(vmn_stack[i*2:i*2+2], axis=1))[0] / 2 for i in range(nb_stack)]),
"R_stack [ohm]": r_stack_mean,
"R_std [ohm]": r_stack_std,
"R_per_stack [Ohm]": np.mean([np.diff(np.mean(vmn_stack[i*2:i*2+2], axis=1)) / 2 for i in range(nb_stack)]) / np.array([np.mean(i_stack[i*2:i*2+2]) for i in range(nb_stack)]),
"PS_per_stack [mV]": np.array([np.mean(np.mean(vmn_stack[i*2:i*2+2], axis=1)) for i in range(nb_stack)]),
"PS_stack [mV]": ps_stack_mean,
"R_ab [ohm]": Rab
}
# print(np.array([(vmn_stack[i*2:i*2+2]) for i in range(nb_stack)]))
# elif self.board_version == '22.10':
# d = {
# "time": datetime.now().isoformat(),
# "A": quad[0],
# "B": quad[1],
# "M": quad[2],
# "N": quad[3],
# "inj time [ms]": (end_delay - start_delay) * 1000. if not out_of_range else 0.,
# "Vmn [mV]": sum_vmn / (2 * nb_stack),
# "I [mA]": sum_i / (2 * nb_stack),
# "R [ohm]": sum_vmn / sum_i,
# "Ps [mV]": sum_ps / (2 * nb_stack),
# "nbStack": nb_stack,
# "Tx [V]": tx_volt if not out_of_range else 0.,
# "CPU temp [degC]": CPUTemperature().temperature,
# "Nb samples [-]": self.nb_samples,
# "fulldata": fulldata,
# }
else: # for testing, generate random data
d = {'time': datetime.now().isoformat(), 'A': quad[0], 'B': quad[1], 'M': quad[2], 'N': quad[3],
'R [ohm]': np.abs(np.random.randn(1)).tolist()}
# to the data logger
dd = d.copy()
dd.pop('fulldata') # too much for logger
dd.update({'A': str(dd['A'])})
dd.update({'B': str(dd['B'])})
dd.update({'M': str(dd['M'])})
dd.update({'N': str(dd['N'])})
# round float to 2 decimal
for key in dd.keys(): # Check why this is applied on keys and not values...
if isinstance(dd[key], float):
dd[key] = np.round(dd[key], 3)
dd['cmd_id'] = str(cmd_id)
self.data_logger.info(dd)
# self.pin5.value = False #IHM led on measurement off
# if self.sequence is None :
# self.switch_dps('off')
return d
def run_multiple_sequences(self, cmd_id=None, sequence_delay=None, nb_meas=None, **kwargs):
"""Runs multiple sequences in a separate thread for monitoring mode.
Can be stopped by 'OhmPi.interrupt()'.
Additional arguments are passed to run_measurement().
Parameters
----------
cmd_id : str, optional
Unique command identifier
sequence_delay : int, optional
Number of seconds at which the sequence must be started from each others.
nb_meas : int, optional
Number of time the sequence must be repeated.
kwargs : dict, optional
See help(k.run_measurement) for more info.
"""
# self.run = True
if sequence_delay is None:
sequence_delay = self.settings['sequence_delay']
sequence_delay = int(sequence_delay)
if nb_meas is None:
nb_meas = self.settings['nb_meas']
self.status = 'running'
self.exec_logger.debug(f'Status: {self.status}')
self.exec_logger.debug(f'Measuring sequence: {self.sequence}')
def func():
for g in range(0, nb_meas): # for time-lapse monitoring
if self.status == 'stopping':
self.exec_logger.warning('Data acquisition interrupted')
break
t0 = time.time()
self.run_sequence(**kwargs)
# sleeping time between sequence
dt = sequence_delay - (time.time() - t0)
if dt < 0:
dt = 0
if nb_meas > 1:
time.sleep(dt) # waiting for next measurement (time-lapse)
self.status = 'idle'
self.thread = threading.Thread(target=func)
self.thread.start()
def run_sequence(self, cmd_id=None, **kwargs):
"""Runs sequence synchronously (=blocking on main thread).
Additional arguments are passed to run_measurement().
Parameters
----------
cmd_id : str, optional
Unique command identifier
"""
self.status = 'running'
self.exec_logger.debug(f'Status: {self.status}')
self.exec_logger.debug(f'Measuring sequence: {self.sequence}')
t0 = time.time()
self.reset_mux()
# create filename with timestamp
filename = self.settings["export_path"].replace('.csv',
f'_{datetime.now().strftime("%Y%m%dT%H%M%S")}.csv')
self.exec_logger.debug(f'Saving to {filename}')
# make sure all multiplexer are off
# measure all quadrupole of the sequence
if self.sequence is None:
n = 1
else:
n = self.sequence.shape[0]
for i in range(0, n):
if self.sequence is None:
quad = np.array([0, 0, 0, 0])
else:
quad = self.sequence[i, :] # quadrupole
if self.status == 'stopping':
break
# if i == 0:
# # call the switch_mux function to switch to the right electrodes
# # switch on DPS
# self.mcp_board = MCP23008(self.i2c, address=self.mcp_board_address)
# self.pin2 = self.mcp_board.get_pin(2) # dsp -
# self.pin2.direction = Direction.OUTPUT
# self.pin2.value = True
# self.pin3 = self.mcp_board.get_pin(3) # dsp -
# self.pin3.direction = Direction.OUTPUT
# self.pin3.value = True
# time.sleep (4)
#
# #self.switch_dps('on')
# time.sleep(.6)
# self.switch_mux_on(quad)
# run a measurement
if self.on_pi:
acquired_data = self.run_measurement(quad, **kwargs)
else: # for testing, generate random data
sum_vmn = np.random.rand(1)[0] * 1000.
sum_i = np.random.rand(1)[0] * 100.
cmd_id = np.random.randint(1000)
acquired_data = {
"time": datetime.now().isoformat(),
"A": quad[0],
"B": quad[1],
"M": quad[2],
"N": quad[3],
"inj time [ms]": self.settings['injection_duration'] * 1000.,
"Vmn [mV]": sum_vmn,
"I [mA]": sum_i,
"R [ohm]": sum_vmn / sum_i,
"Ps [mV]": np.random.randn(1)[0] * 100.,
"nbStack": self.settings['nb_stack'],
"Tx [V]": np.random.randn(1)[0] * 5.,
"CPU temp [degC]": np.random.randn(1)[0] * 50.,
"Nb samples [-]": self.nb_samples,
}
self.data_logger.info(acquired_data)
# # switch mux off
# self.switch_mux_off(quad)
#
# # add command_id in dataset
acquired_data.update({'cmd_id': cmd_id})
# log data to the data logger
# self.data_logger.info(f'{acquired_data}')
# save data and print in a text file
self.append_and_save(filename, acquired_data)
self.exec_logger.debug(f'quadrupole {i + 1:d}/{n:d}')
# self.switch_dps('off')
self.status = 'idle'
def run_sequence_async(self, cmd_id=None, **kwargs):
"""Runs the sequence in a separate thread. Can be stopped by 'OhmPi.interrupt()'.
Additional arguments are passed to run_measurement().
Parameters
----------
cmd_id : str, optional
Unique command identifier
"""
def func():
self.run_sequence(**kwargs)
self.thread = threading.Thread(target=func)
self.thread.start()
self.status = 'idle'
def rs_check(self, tx_volt=12., cmd_id=None): # TODO: we could build a smarter RS-Check by selecting adjacent electrodes based on their locations and try to isolate electrodes that are responsible for high resistances (ex: AB high, AC low, BC high -> might be a problem at B (cf what we did with WofE)
"""Checks contact resistances
Parameters
----------
tx_volt : float
Voltage of the injection
cmd_id : str, optional
Unique command identifier
"""
# create custom sequence where MN == AB
# we only check the electrodes which are in the sequence (not all might be connected)
if self.sequence is None or not self.use_mux:
quads = np.array([[1, 2, 1, 2]], dtype=np.uint32)
else:
elec = np.sort(np.unique(self.sequence.flatten())) # assumed order
quads = np.vstack([
elec[:-1],
elec[1:],
elec[:-1],
elec[1:],
]).T
# if self.idps:
# quads[:, 2:] = 0 # we don't open Vmn to prevent burning the MN part
# # as it has a smaller range of accepted voltage
# create filename to store RS
export_path_rs = self.settings['export_path'].replace('.csv', '') \
+ '_' + datetime.now().strftime('%Y%m%dT%H%M%S') + '_rs.csv'
# perform RS check
self.status = 'running'
if self.on_pi:
# make sure all mux are off to start with
self._hw.mux.reset_mux()
# measure all quad of the RS sequence
for i in range(0, quads.shape[0]):
quad = quads[i, :] # quadrupole
self.switch_mux_on(quad) # put before raising the pins (otherwise conflict i2c)
d = self.run_measurement(quad=quad, nb_stack=1, injection_duration=0.2, tx_volt=tx_volt, autogain=False)
if self.idps:
voltage = tx_volt * 1000. # imposed voltage on dps5005
else:
voltage = d['Vmn [mV]']
current = d['I [mA]']
# compute resistance measured (= contact resistance)
resist = abs(voltage / current) / 1000.
# print(str(quad) + '> I: {:>10.3f} mA, V: {:>10.3f} mV, R: {:>10.3f} kOhm'.format(
# current, voltage, resist))
msg = f'Contact resistance {str(quad):s}: I: {current * 1000.:>10.3f} mA, ' \
f'V: {voltage :>10.3f} mV, ' \
f'R: {resist :>10.3f} kOhm'
self.exec_logger.debug(msg)
# if contact resistance = 0 -> we have a short circuit!!
if resist < 1e-5:
msg = f'!!!SHORT CIRCUIT!!! {str(quad):s}: {resist:.3f} kOhm'
self.exec_logger.warning(msg)
# save data in a text file
self.append_and_save(export_path_rs, {
'A': quad[0],
'B': quad[1],
'RS [kOhm]': resist,
})
# close mux path and put pin back to GND
self.switch_mux_off(quad)
else:
pass
self.status = 'idle'
#
# # TODO if interrupted, we would need to restore the values
# # TODO or we offer the possibility in 'run_measurement' to have rs_check each time?
def set_sequence(self, sequence=None, cmd_id=None):
"""Sets the sequence to acquire
Parameters
----------
sequence : list, str
sequence of quadrupoles
cmd_id: str, optional
Unique command identifier
"""
try:
self.sequence = np.array(sequence).astype(int)
# self.sequence = np.loadtxt(StringIO(sequence)).astype('uint32')
status = True
except Exception as e:
self.exec_logger.warning(f'Unable to set sequence: {e}')
status = False
def stop(self, **kwargs):
warnings.warn('This function is deprecated. Use interrupt instead.', DeprecationWarning)
self.interrupt(**kwargs)
def _switch_mux(self, electrode_nr, state, role):
"""Selects the right channel for the multiplexer cascade for a given electrode.
Parameters
----------
electrode_nr : int
Electrode index to be switched on or off.
state : str
Either 'on' or 'off'.
role : str
Either 'A', 'B', 'M' or 'N', so we can assign it to a MUX board.
"""
if not self.use_mux or not self.on_pi:
if not self.on_pi:
self.exec_logger.warning('Cannot reset mux while in simulation mode...')
else:
self.exec_logger.warning('You cannot use the multiplexer because use_mux is set to False.'
' Set use_mux to True to use the multiplexer...')
elif self.sequence is None and not self.use_mux:
self.exec_logger.warning('Unable to switch MUX without a sequence')
else:
# choose with MUX board
tca = adafruit_tca9548a.TCA9548A(self.i2c, self.board_addresses[role])
# find I2C address of the electrode and corresponding relay
# considering that one MCP23017 can cover 16 electrodes
i2c_address = 7 - (electrode_nr - 1) // 16 # quotient without rest of the division
relay_nr = (electrode_nr-1) - ((electrode_nr-1) // 16) * 16
if i2c_address is not None:
# select the MCP23017 of the selected MUX board
mcp2 = MCP23017(tca[i2c_address])
mcp2.get_pin(relay_nr).direction = digitalio.Direction.OUTPUT
if state == 'on':
mcp2.get_pin(relay_nr).value = True
else:
mcp2.get_pin(relay_nr).value = False
self.exec_logger.debug(f'Switching relay {relay_nr} '
f'({str(hex(self.board_addresses[role]))}) {state} for electrode {electrode_nr}')
else:
self.exec_logger.warning(f'Unable to address electrode nr {electrode_nr}')
def switch_dps(self,state='off'):
"""Switches DPS on or off.
Parameters
----------
state : str
'on', 'off'
"""
self.pin2 = self.mcp_board.get_pin(2) # dsp -
self.pin2.direction = Direction.OUTPUT
self.pin3 = self.mcp_board.get_pin(3) # dsp -
self.pin3.direction = Direction.OUTPUT
if state == 'on':
self.pin2.value = True
self.pin3.value = True
self.exec_logger.debug(f'Switching DPS on')
time.sleep(4)
elif state == 'off':
self.pin2.value = False
self.pin3.value = False
self.exec_logger.debug(f'Switching DPS off')
def switch_mux_on(self, quadrupole, cmd_id=None):
"""Switches on multiplexer relays for given quadrupole.
Parameters
----------
cmd_id : str, optional
Unique command identifier
quadrupole : list of 4 int
List of 4 integers representing the electrode numbers.
"""
roles = ['A', 'B', 'M', 'N']
# another check to be sure A != B
if quadrupole[0] != quadrupole[1]:
for i in range(0, 4):
if quadrupole[i] > 0:
self._switch_mux(quadrupole[i], 'on', roles[i])
else:
self.exec_logger.error('Not switching MUX : A == B -> short circuit risk detected!')
def switch_mux_off(self, quadrupole, cmd_id=None):
"""Switches off multiplexer relays for given quadrupole.
Parameters
----------
cmd_id : str, optional
Unique command identifier
quadrupole : list of 4 int
List of 4 integers representing the electrode numbers.
"""
roles = ['A', 'B', 'M', 'N']
for i in range(0, 4):
if quadrupole[i] > 0:
self._switch_mux(quadrupole[i], 'off', roles[i])
# def test_mux(self, activation_time=1.0, address=0x70): TODO: add this in the MUX code
# """Interactive method to test the multiplexer.
#
# Parameters
# ----------
# activation_time : float, optional
# Time in seconds during which the relays are activated.
# address : hex, optional
# Address of the multiplexer board to test (e.g. 0x70, 0x71, ...).
# """
# self.use_mux = True
# self.reset_mux()
#
# # choose with MUX board
# tca = adafruit_tca9548a.TCA9548A(self.i2c, address)
#
# # ask use some details on how to proceed
# a = input('If you want try 1 channel choose 1, if you want try all channels choose 2!')
# if a == '1':
# print('run channel by channel test')
# electrode = int(input('Choose your electrode number (integer):'))
# electrodes = [electrode]
# elif a == '2':
# electrodes = range(1, 65)
# else:
# print('Wrong choice !')
# return
#
# # run the test
# for electrode_nr in electrodes:
# # find I2C address of the electrode and corresponding relay
# # considering that one MCP23017 can cover 16 electrodes
# i2c_address = 7 - (electrode_nr - 1) // 16 # quotient without rest of the division
# relay_nr = electrode_nr - (electrode_nr // 16) * 16 + 1
#
# if i2c_address is not None:
# # select the MCP23017 of the selected MUX board
# mcp2 = MCP23017(tca[i2c_address])
# mcp2.get_pin(relay_nr - 1).direction = digitalio.Direction.OUTPUT
#
# # activate relay for given time
# mcp2.get_pin(relay_nr - 1).value = True
# print('electrode:', electrode_nr, ' activated...', end='', flush=True)
# time.sleep(activation_time)
# mcp2.get_pin(relay_nr - 1).value = False
# print(' deactivated')
# time.sleep(activation_time)
# print('Test finished.')
def reset_mux(self, cmd_id=None):
"""Switches off all multiplexer relays.
Parameters
----------
cmd_id : str, optional
Unique command identifier
"""
if self.on_pi and self.use_mux:
roles = ['A', 'B', 'M', 'N']
for i in range(0, 4):
for j in range(1, self.max_elec + 1):
self._switch_mux(j, 'off', roles[i])
self.exec_logger.debug('All MUX switched off.')
elif not self.on_pi:
self.exec_logger.warning('Cannot reset mux while in simulation mode...')
else:
self.exec_logger.warning('You cannot use the multiplexer because use_mux is set to False.'
' Set use_mux to True to use the multiplexer...')
def _update_acquisition_settings(self, config):
warnings.warn('This function is deprecated, use update_settings() instead.', DeprecationWarning)
self.update_settings(settings=config)
def update_settings(self, settings: str, cmd_id=None):
"""Updates acquisition settings from a json file or dictionary.
Parameters can be:
- nb_electrodes (number of electrode used, if 4, no MUX needed)
- injection_duration (in seconds)
- nb_meas (total number of times the sequence will be run)
- sequence_delay (delay in second between each sequence run)
- nb_stack (number of stack for each quadrupole measurement)
- export_path (path where to export the data, timestamp will be added to filename)
Parameters
----------
settings : str, dict
Path to the .json settings file or dictionary of settings.
cmd_id : str, optional
Unique command identifier
"""
status = False
if settings is not None:
try:
if isinstance(settings, dict):
self.settings.update(settings)
else:
with open(settings) as json_file:
dic = json.load(json_file)
self.settings.update(dic)
self.exec_logger.debug('Acquisition parameters updated: ' + str(self.settings))
status = True
except Exception as e: # noqa
self.exec_logger.warning('Unable to update settings.')
status = False
else:
self.exec_logger.warning('Settings are missing...')
return status
# Properties
@property
def sequence(self):
"""Gets sequence"""
if self._sequence is not None:
assert isinstance(self._sequence, np.ndarray)
return self._sequence
@sequence.setter
def sequence(self, sequence):
"""Sets sequence"""
if sequence is not None:
assert isinstance(sequence, np.ndarray)
self.use_mux = True
else:
self.use_mux = False
self._sequence = sequence
VERSION = '2.1.5'
print(colored(r' ________________________________' + '\n' +
r'| _ | | | || \/ || ___ \_ _|' + '\n' +
r'| | | | |_| || . . || |_/ / | |' + '\n' +
r'| | | | _ || |\/| || __/ | |' + '\n' +
r'\ \_/ / | | || | | || | _| |_' + '\n' +
r' \___/\_| |_/\_| |_/\_| \___/ ', 'red'))
print('Version:', VERSION)
platform, on_pi = get_platform()
if on_pi:
print(colored(f'\u2611 Running on {platform} platform', 'green'))
# TODO: check model for compatible platforms (exclude Raspberry Pi versions that are not supported...)
# and emit a warning otherwise
if not arm64_imports:
print(colored(f'Warning: Required packages are missing.\n'
f'Please run ./env.sh at command prompt to update your virtual environment\n', 'yellow'))
else:
print(colored(f'\u26A0 Not running on the Raspberry Pi platform.\nFor simulation purposes only...', 'yellow'))
current_time = datetime.now()
print(f'local date and time : {current_time.strftime("%Y-%m-%d %H:%M:%S")}')
# for testing
if __name__ == "__main__":
ohmpi = OhmPi(settings=OHMPI_CONFIG['settings'])
if ohmpi.controller is not None:
ohmpi.controller.loop_forever()