# -*- coding: utf-8 -*-
"""
created on January 6, 2020.
Updates May 2022, Oct 2022.
Ohmpi.py is a program to control a low-cost and open hardware resistivity meter OhmPi that has been developed by
Rémi CLEMENT (INRAE),Vivien DUBOIS (INRAE), Hélène GUYARD (IGE), Nicolas FORQUET (INRAE), Yannick FARGIER (IFSTTAR)
Olivier KAUFMANN (UMONS), Arnaud WATELET (UMONS) and Guillaume BLANCHY (ILVO).
"""
import os
import io
import json
import numpy as np
import csv
import time
from io import StringIO
from datetime import datetime
from termcolor import colored
import threading
import paho.mqtt.client as mqtt_client
from logging_setup import setup_loggers
from config import MQTT_CONTROL_CONFIG, OHMPI_CONFIG
# finish import (done only when class is instantiated as some libs are only available on arm64 platform)
try:
import board # noqa
import busio # noqa
import adafruit_tca9548a # noqa
import adafruit_ads1x15.ads1115 as ads # noqa
from adafruit_ads1x15.analog_in import AnalogIn # noqa
from adafruit_mcp230xx.mcp23008 import MCP23008 # noqa
from adafruit_mcp230xx.mcp23017 import MCP23017 # noqa
import digitalio # noqa
from digitalio import Direction # noqa
from gpiozero import CPUTemperature # noqa
arm64_imports = True
except ImportError as error:
print(colored(f'Import error: {error}', 'yellow'))
arm64_imports = False
except Exception as error:
print(colored(f'Unexpected error: {error}', 'red'))
exit()
class OhmPi(object):
"""Create the main OhmPi object.
Parameters
----------
settings : str, optional
Path to the .json configuration file.
sequence : str, optional
Path to the .txt where the sequence is read. By default, a 1 quadrupole
sequence: 1, 2, 3, 4 is used.
"""
def __init__(self, settings=None, sequence=None, use_mux=False, mqtt=True, on_pi=None):
# flags and attributes
if on_pi is None:
_, on_pi = OhmPi.get_platform()
self._sequence = sequence
self.use_mux = use_mux
self.on_pi = on_pi # True if run from the RaspberryPi with the hardware, otherwise False for random data
self.status = 'idle' # either running or idle
self.thread = None # contains the handle for the thread taking the measurement
# set loggers
config_exec_logger, _, config_data_logger, _, _ = setup_loggers(mqtt=mqtt) # TODO: add SOH
self.data_logger = config_data_logger
self.exec_logger = config_exec_logger
self.soh_logger = None
print('Loggers:')
print(colored(f'Exec logger {self.exec_logger.handlers if self.exec_logger is not None else "None"}', 'blue'))
print(colored(f'Data logger {self.data_logger.handlers if self.data_logger is not None else "None"}', 'blue'))
print(colored(f'SOH logger {self.soh_logger.handlers if self.soh_logger is not None else "None"}', 'blue'))
# set controller
self.controller = mqtt_client.Client(f"ohmpi_{OHMPI_CONFIG['id']}_listener", clean_session=False) # create new instance
print(colored(f"Connecting to control topic {MQTT_CONTROL_CONFIG['ctrl_topic']} on {MQTT_CONTROL_CONFIG['hostname']} broker", 'blue'))
trials = 0
trials_max = 10
broker_connected = False
while trials < trials_max:
try:
self.controller.username_pw_set(MQTT_CONTROL_CONFIG['auth'].get('username'),
MQTT_CONTROL_CONFIG['auth']['password'])
self.controller.connect(MQTT_CONTROL_CONFIG['hostname'])
trials = trials_max
broker_connected = True
except Exception as e:
self.exec_logger.debug(f'Unable to connect control broker: {e}')
self.exec_logger.info('trying again to connect to control broker...')
time.sleep(2)
trials += 1
if broker_connected:
self.exec_logger.info(f"Subscribing to control topic {MQTT_CONTROL_CONFIG['ctrl_topic']}")
self.controller.subscribe(MQTT_CONTROL_CONFIG['ctrl_topic'], MQTT_CONTROL_CONFIG['qos'])
else:
self.exec_logger.error(f"Unable to connect to control broker on {MQTT_CONTROL_CONFIG['hostname']}")
self.controller = None
# read in hardware parameters (config.py)
self._read_hardware_config()
# default acquisition settings
self.settings = {
'injection_duration': 0.2,
'nbr_meas': 1,
'sequence_delay': 1,
'nb_stack': 1,
'export_path': 'data/measurement.csv'
}
print(self.settings)
# read in acquisition settings
if settings is not None:
self._update_acquisition_settings(settings)
print(self.settings)
self.exec_logger.debug('Initialized with settings:' + str(self.settings))
# read quadrupole sequence
if sequence is not None:
self.load_sequence(sequence)
# connect to components on the OhmPi board
if self.on_pi:
# activation of I2C protocol
self.i2c = busio.I2C(board.SCL, board.SDA) # noqa
# I2C connexion to MCP23008, for current injection
self.mcp = MCP23008(self.i2c, address=0x20)
# ADS1115 for current measurement (AB)
self.ads_current = ads.ADS1115(self.i2c, gain=2 / 3, data_rate=860, address=0x48)
# ADS1115 for voltage measurement (MN)
self.ads_voltage = ads.ADS1115(self.i2c, gain=2 / 3, data_rate=860, address=0x49)
# Starts the command processing thread
self.cmd_listen = True
self.cmd_thread = threading.Thread(target=self._control)
self.cmd_thread.start()
@property
def sequence(self):
"""Gets or sets sequence"""
if self._sequence is not None:
assert isinstance(self._sequence, np.ndarray)
return self._sequence
@sequence.setter
def sequence(self, sequence):
if sequence is not None:
assert isinstance(sequence, np.ndarray)
self.use_mux = True
else:
self.use_mux = False
self._sequence = sequence
def _control(self):
def on_message(client, userdata, message):
command = message.payload.decode('utf-8')
self.exec_logger.debug(f'Received command {command}')
self.process_commands(command)
self.controller.on_message = on_message
self.controller.loop_start()
while True:
time.sleep(.5)
def _update_acquisition_settings(self, config):
"""Update acquisition settings from a json file or dictionary.
Parameters can be:
- nb_electrodes (number of electrode used, if 4, no MUX needed)
- injection_duration (in seconds)
- nbr_meas (total number of times the sequence will be run)
- sequence_delay (delay in second between each sequence run)
- nb_stack (number of stack for each quadrupole measurement)
- export_path (path where to export the data, timestamp will be added to filename)
Parameters
----------
config : str
Path to the .json or dictionary.
"""
if isinstance(config, dict):
self.settings.update(config)
else:
with open(config) as json_file:
dic = json.load(json_file)
self.settings.update(dic)
self.exec_logger.debug('Acquisition parameters updated: ' + str(self.settings))
def _read_hardware_config(self):
"""Read hardware configuration from config.py
"""
from config import OHMPI_CONFIG
self.id = OHMPI_CONFIG['id'] # ID of the OhmPi
self.r_shunt = OHMPI_CONFIG['R_shunt'] # reference resistance value in ohm
self.Imax = OHMPI_CONFIG['Imax'] # maximum current
self.exec_logger.warning(f'The maximum current cannot be higher than {self.Imax} mA')
self.coef_p2 = OHMPI_CONFIG['coef_p2'] # slope for current conversion for ads.P2, measurement in V/V
self.coef_p3 = OHMPI_CONFIG['coef_p3'] # slope for current conversion for ads.P3, measurement in V/V
# self.offset_p2 = OHMPI_CONFIG['offset_p2'] parameter removed
# self.offset_p3 = OHMPI_CONFIG['offset_p3'] parameter removed
self.nb_samples = OHMPI_CONFIG['integer'] # number of samples measured for each stack
self.version = OHMPI_CONFIG['version'] # hardware version
self.max_elec = OHMPI_CONFIG['max_elec'] # maximum number of electrodes
self.board_addresses = OHMPI_CONFIG['board_addresses']
self.exec_logger.debug(f'OHMPI_CONFIG = {str(OHMPI_CONFIG)}')
@staticmethod
def find_identical_in_line(quads):
"""Find quadrupole where A and B are identical.
If A and B are connected to the same relay, the Pi burns (short-circuit).
Parameters
----------
quads : numpy.ndarray
List of quadrupoles of shape nquad x 4 or 1D vector of shape nquad.
Returns
-------
output : numpy.ndarray 1D array of int
List of index of rows where A and B are identical.
"""
# TODO is this needed for M and N?
# if we have a 1D array (so only 1 quadrupole), make it 2D
if len(quads.shape) == 1:
quads = quads[None, :]
output = np.where(quads[:, 0] == quads[:, 1])[0]
# output = []
# if array_object.ndim == 1:
# temp = np.zeros(4)
# for i in range(len(array_object)):
# temp[i] = np.count_nonzero(array_object == array_object[i])
# if any(temp > 1):
# output.append(0)
# else:
# for i in range(len(array_object[:,1])):
# temp = np.zeros(len(array_object[1,:]))
# for j in range(len(array_object[1,:])):
# temp[j] = np.count_nonzero(array_object[i,:] == array_object[i,j])
# if any(temp > 1):
# output.append(i)
return output
@staticmethod
def get_platform():
"""Get platform name and check if it is a raspberry pi
Returns
=======
str, bool
name of the platform on which the code is running, boolean that is true if the platform is a raspberry pi"""
platform = 'unknown'
on_pi = False
try:
with io.open('/sys/firmware/devicetree/base/model', 'r') as f:
platform = f.read().lower()
if 'raspberry pi' in platform:
on_pi = True
except FileNotFoundError:
pass
return platform, on_pi
def load_sequence(self, filename):
"""Read quadrupole sequence from file.
Parameters
----------
filename : str
Path of the .csv or .txt file with A, B, M and N electrodes.
Electrode index start at 1.
Returns
-------
sequence : numpy.array
Array of shape (number quadrupoles * 4).
"""
sequence = np.loadtxt(filename, delimiter=" ", dtype=np.uint32) # load quadrupole file
if sequence is not None:
self.exec_logger.debug('Sequence of {:d} quadrupoles read.'.format(sequence.shape[0]))
# locate lines where the electrode index exceeds the maximum number of electrodes
test_index_elec = np.array(np.where(sequence > self.max_elec))
# locate lines where electrode A == electrode B
test_same_elec = self.find_identical_in_line(sequence)
# if statement with exit cases (TODO rajouter un else if pour le deuxième cas du ticket #2)
if test_index_elec.size != 0:
for i in range(len(test_index_elec[0, :])):
self.exec_logger.error(f'An electrode index at line {str(test_index_elec[0, i] + 1)} '
f'exceeds the maximum number of electrodes')
# sys.exit(1)
sequence = None
elif len(test_same_elec) != 0:
for i in range(len(test_same_elec)):
self.exec_logger.error(f'An electrode index A == B detected at line {str(test_same_elec[i] + 1)}')
# sys.exit(1)
sequence = None
if sequence is not None:
self.exec_logger.info('Sequence of {:d} quadrupoles read.'.format(sequence.shape[0]))
else:
self.exec_logger.warning(f'Unable to load sequence {filename}')
self.sequence = sequence
def switch_mux(self, electrode_nr, state, role):
"""Select the right channel for the multiplexer cascade for a given electrode.
Parameters
----------
electrode_nr : int
Electrode index to be switched on or off.
state : str
Either 'on' or 'off'.
role : str
Either 'A', 'B', 'M' or 'N', so we can assign it to a MUX board.
"""
if not self.use_mux:
pass # no MUX or don't use MUX
elif self.sequence is None:
self.exec_logger.warning('Unable to switch MUX without a sequence')
else:
# choose with MUX board
tca = adafruit_tca9548a.TCA9548A(self.i2c, self.board_addresses[role])
# find I2C address of the electrode and corresponding relay
# TODO from number of electrode, the below can be guessed
# considering that one MCP23017 can cover 16 electrodes
i2c_address = 7 - (electrode_nr - 1) // 16 # quotient without rest of the division
relay_nr = electrode_nr - (electrode_nr // 16) * 16 +1
if i2c_address is not None:
# select the MCP23017 of the selected MUX board
mcp2 = MCP23017(tca[i2c_address])
mcp2.get_pin(relay_nr - 1).direction = digitalio.Direction.OUTPUT
if state == 'on':
mcp2.get_pin(relay_nr - 1).value = True
else:
mcp2.get_pin(relay_nr - 1).value = False
self.exec_logger.debug(f'Switching relay {relay_nr} {state} for electrode {electrode_nr}')
else:
self.exec_logger.warning(f'Unable to address electrode nr {electrode_nr}')
def switch_mux_on(self, quadrupole):
""" Switch on multiplexer relays for given quadrupole.
Parameters
----------
quadrupole : list of 4 int
List of 4 integers representing the electrode numbers.
"""
roles = ['A', 'B', 'M', 'N']
# another check to be sure A != B
if quadrupole[0] != quadrupole[1]:
for i in range(0, 4):
self.switch_mux(quadrupole[i], 'on', roles[i])
else:
self.exec_logger.error('A == B -> short circuit risk detected!')
def switch_mux_off(self, quadrupole):
""" Switch off multiplexer relays for given quadrupole.
Parameters
----------
quadrupole : list of 4 int
List of 4 integers representing the electrode numbers.
"""
roles = ['A', 'B', 'M', 'N']
for i in range(0, 4):
self.switch_mux(quadrupole[i], 'off', roles[i])
def reset_mux(self):
"""Switch off all multiplexer relays."""
roles = ['A', 'B', 'M', 'N']
for i in range(0, 4):
for j in range(1, self.max_elec + 1):
self.switch_mux(j, 'off', roles[i])
self.exec_logger.debug('All MUX switched off.')
def gain_auto(self, channel):
""" Automatically set the gain on a channel
Parameters
----------
channel:
Returns
-------
float
"""
gain = 2 / 3
if (abs(channel.voltage) < 2.040) and (abs(channel.voltage) >= 1.023):
gain = 2
elif (abs(channel.voltage) < 1.023) and (abs(channel.voltage) >= 0.508):
gain = 4
elif (abs(channel.voltage) < 0.508) and (abs(channel.voltage) >= 0.250):
gain = 8
elif abs(channel.voltage) < 0.256:
gain = 16
self.exec_logger.debug(f'Setting gain to {gain}')
return gain
def run_measurement(self, quad=None, nb_stack=None, injection_duration=None):
""" Do a 4 electrode measurement and measure transfer resistance obtained.
Parameters
----------
quad : iterable (list of int)
Quadrupole to measure.
nb_stack : int, optional
Number of stacks.
injection_duration : int, optional
Injection time in seconds.
"""
# TODO here we can add the current_injected or voltage_injected in mA or mV
# check arguments
if quad is None:
quad = [0, 0, 0, 0]
self.exec_logger.debug('Starting measurement')
self.exec_logger.info('Waiting for data')
if self.on_pi:
if nb_stack is None:
nb_stack = self.settings['nb_stack']
if injection_duration is None:
injection_duration = self.settings['injection_duration']
start_time = time.time()
# inner variable initialization
injection_current = 0
sum_vmn = 0
sum_ps = 0
# injection courant and measure
pin0 = self.mcp.get_pin(0)
pin0.direction = Direction.OUTPUT
pin1 = self.mcp.get_pin(1)
pin1.direction = Direction.OUTPUT
pin0.value = False
pin1.value = False
# FUNCTION AUTOGAIN
# ADS1115 for current measurement (AB)
self.ads_current = ads.ADS1115(self.i2c, gain=2 / 3, data_rate=860, address=0x48)
# ADS1115 for voltage measurement (MN)
self.ads_voltage = ads.ADS1115(self.i2c, gain=2 / 3, data_rate=860, address=0x49)
# try auto gain
pin1.value = True
pin0.value = False
time.sleep(injection_duration)
gain_current = self.gain_auto(AnalogIn(self.ads_current, ads.P0))
gain_voltage = self.gain_auto(AnalogIn(self.ads_voltage, ads.P0, ads.P1))
pin0.value = False
pin1.value = False
print('gain current: {:.3f}, gain voltage: {:.3f}'.format(gain_current, gain_voltage))
self.ads_current = ads.ADS1115(self.i2c, gain=gain_current, data_rate=860, address=0x48)
self.ads_voltage = ads.ADS1115(self.i2c, gain=gain_voltage, data_rate=860, address=0x49)
# TODO I don't get why 3 + 2*nb_stack - 1? why not just range(nb_stack)?
# or do we consider 1 stack = one full polarity? do we discard the first 3 readings?
for n in range(0, 3 + 2 * nb_stack - 1):
# current injection
if (n % 2) == 0:
pin1.value = True
pin0.value = False # current injection polarity nr1
else:
pin0.value = True
pin1.value = False # current injection nr2
start_delay = time.time() # stating measurement time
time.sleep(injection_duration) # delay depending on current injection duration
# measurement of current i and voltage u
# sampling for each stack at the end of the injection
meas = np.zeros((self.nb_samples, 3))
for k in range(0, self.nb_samples):
# reading current value on ADS channel A0
meas[k, 0] = (AnalogIn(self.ads_current, ads.P0).voltage * 1000) / (50 * self.r_shunt) # TODO: replace 50 by factor depending on INA model specifed in config.py
# reading voltage value on ADS channel A2
meas[k, 1] = -AnalogIn(self.ads_voltage, ads.P0, ads.P1).voltage * self.coef_p2 * 1000 # NOTE: Changed sign
# stop current injection
pin1.value = False
pin0.value = False
end_delay = time.time()
# take average from the samples per stack, then sum them all
# average for all stack is done outside the loop
injection_current = injection_current + (np.mean(meas[:, 0]))
vmn1 = np.mean(meas[:, 1]) - np.mean(meas[:, 2])
if (n % 2) == 0:
sum_vmn = sum_vmn - vmn1
sum_ps = sum_ps + vmn1
else:
sum_vmn = sum_vmn + vmn1
sum_ps = sum_ps + vmn1
# TODO get battery voltage and warn if battery is running low
# TODO send a message on SOH stating the battery level
end_calc = time.time()
# TODO I am not sure I understand the computation below
# wait twice the actual injection time between two injection
# so it's a 50% duty cycle right?
time.sleep(2 * (end_delay - start_delay) - (end_calc - start_delay))
# create a dictionary and compute averaged values from all stacks
d = {
"time": datetime.now().isoformat(),
"A": quad[0],
"B": quad[1],
"M": quad[2],
"N": quad[3],
"inj time [ms]": (end_delay - start_delay) * 1000,
"Vmn [mV]": (sum_vmn / (3 + 2 * nb_stack - 1)),
"I [mA]": (injection_current / (3 + 2 * nb_stack - 1)),
"R [ohm]": (sum_vmn / (3 + 2 * nb_stack - 1) / (injection_current / (3 + 2 * nb_stack - 1))),
"Ps [mV]": (sum_ps / (3 + 2 * nb_stack - 1)),
"nbStack": nb_stack,
"CPU temp [degC]": CPUTemperature().temperature,
"Time [s]": (-start_time + time.time()),
"Nb samples [-]": self.nb_samples
}
else: # for testing, generate random data
d = {'time': datetime.now().isoformat(), 'A': quad[0], 'B': quad[1], 'M': quad[2], 'N': quad[3],
'R [ohm]': np.abs(np.random.randn(1)).tolist()}
# round number to two decimal for nicer string output
output = [f'{k}\t' for k in d.keys()]
output = str(output)[:-1] + '\n'
for k in d.keys():
if isinstance(d[k], float):
val = np.round(d[k], 2)
else:
val = d[k]
output += f'{val}\t'
output = output[:-1]
self.exec_logger.debug(output)
dd = d.copy()
dd.update({'A': str(dd['A'])})
dd.update({'B': str(dd['B'])})
dd.update({'M': str(dd['M'])})
dd.update({'N': str(dd['N'])})
print(np.dtype(d['A']))
print(json.dumps(dd))
self.data_logger.info(json.dumps(dd))
time.sleep(1) # NOTE: why this?
return d
def rs_check(self):
""" Check contact resistance.
"""
# create custom sequence where MN == AB
# we only check the electrodes which are in the sequence (not all might be connected)
if self.sequence is None or not self.use_mux:
quads = np.array([[1, 2, 1, 2]], dtype=np.uint32)
else:
elec = np.sort(np.unique(self.sequence.flatten())) # assumed order
quads = np.vstack([
elec[:-1],
elec[1:],
elec[:-1],
elec[1:],
]).T
# create filename to store RS
export_path_rs = self.settings['export_path'].replace('.csv', '') \
+ '_' + datetime.now().strftime('%Y%m%dT%H%M%S') + '_rs.csv'
# perform RS check
# self.run = True
self.status = 'running'
if self.on_pi:
# make sure all mux are off to start with
self.reset_mux()
# measure all quad of the RS sequence
for i in range(0, quads.shape[0]):
quad = quads[i, :] # quadrupole
# NOTE (GB): I'd use the self.run_measurement() for all this middle part so we an make use of autogain and so ...
# call the switch_mux function to switch to the right electrodes
# self.switch_mux_on(quad)
# run a measurement
# current_measurement = self.run_measurement(quad, 1, 0.25)
# switch mux off
# self.switch_mux_off(quad)
self.switch_mux_on(quad)
# current injection
pin0 = self.mcp.get_pin(0)
pin0.direction = Direction.OUTPUT
pin1 = self.mcp.get_pin(1)
pin1.direction = Direction.OUTPUT
pin0.value = False
pin1.value = False
# call the switch_mux function to switch to the right electrodes
self.ads_current = ads.ADS1115(self.i2c, gain=2 / 3, data_rate=860, address=0x48)
# ADS1115 for voltage measurement (MN)
self.ads_voltage = ads.ADS1115(self.i2c, gain=2 / 3, data_rate=860, address=0x49)
pin1.value = True # inject from pin1 to pin0
pin0.value = False
time.sleep(0.2)
# measure current and voltage
current = AnalogIn(self.ads_current, ads.P0).voltage / (50 * self.r_shunt)
voltage = 12.
# compute resistance measured (= contact resistance)
resistance = np.abs(voltage / current)
msg = f'Contact resistance {str(quad):s}: I: {current * 1000.:>10.3f} mA, ' \
f'V: {voltage * 1000.:>10.3f} mV, ' \
f'R: {resistance /1000.:>10.3f} kOhm'
self.exec_logger.debug(msg)
# if contact resistance = 0 -> we have a short circuit!!
if resistance < 1e-2:
msg = f'!!!SHORT CIRCUIT!!! {str(quad):s}: {resistance / 1000.:.3f} kOhm'
self.exec_logger.warning(msg)
# save data and print in a text file
self.append_and_save(export_path_rs, {
'A': quad[0],
'B': quad[1],
'RS [kOhm]': resistance / 1000.,
})
# close mux path and put pin back to GND
self.switch_mux_off(quad)
pin0.value = False
pin1.value = False
self.reset_mux()
else:
pass
self.status = 'idle'
# self.run = False
#
# # TODO if interrupted, we would need to restore the values
# # TODO or we offer the possibility in 'run_measurement' to have rs_check each time?
@staticmethod
def append_and_save(filename, last_measurement):
"""Append and save last measurement dataframe.
Parameters
----------
filename : str
filename to save the last measurement dataframe
last_measurement : dict
Last measurement taken in the form of a python dictionary
"""
if os.path.isfile(filename):
# Load data file and append data to it
with open(filename, 'a') as f:
w = csv.DictWriter(f, last_measurement.keys())
w.writerow(last_measurement)
# last_measurement.to_csv(f, header=False)
else:
# create data file and add headers
with open(filename, 'a') as f:
w = csv.DictWriter(f, last_measurement.keys())
w.writeheader()
w.writerow(last_measurement)
# last_measurement.to_csv(f, header=True)
def process_commands(self, command):
try:
cmd_id = None
decoded_message = json.loads(command)
cmd_id = decoded_message.pop('cmd_id', None)
cmd = decoded_message.pop('cmd', None)
args = decoded_message.pop('args', None)
status = False
e = None
if cmd is not None and cmd_id is not None:
if cmd == 'update_settings' and args is not None:
self._update_acquisition_settings(args)
status = True
elif cmd == 'set_sequence' and args is not None:
try:
self.sequence = np.loadtxt(StringIO(args)).astype('uint32')
status = True
except Exception as e:
self.exec_logger.warning(f'Unable to set sequence: {e}')
status = False
elif cmd == 'start':
self.measure(cmd_id)
while not self.status == 'idle':
time.sleep(0.1)
status = True
elif cmd == 'stop':
self.stop()
status = True
elif cmd == 'load_sequence':
try:
self.load_sequence(args)
status = True
except Exception as e:
self.exec_logger.warning(f'Unable to load sequence: {e}')
status = False
elif cmd == 'rs_check':
try:
self.rs_check()
status = True
except Exception as e:
print('error====', e)
self.exec_logger.warning(f'Unable to run rs-check: {e}')
else:
self.exec_logger.warning(f'Unknown command {cmd} - cmd_id: {cmd_id}')
except Exception as e:
self.exec_logger.warning(f'Unable to decode command {command}: {e}')
status = False
finally:
reply = {'cmd_id': cmd_id, 'status': status}
reply = json.dumps(reply)
self.exec_logger.debug(f'Execution report: {reply}')
def measure(self, cmd_id=None):
"""Run the sequence in a separate thread. Can be stopped by 'OhmPi.stop()'.
"""
# self.run = True
self.status = 'running'
self.exec_logger.debug(f'Status: {self.status}')
self.exec_logger.debug(f'Measuring sequence: {self.sequence}')
def func():
for g in range(0, self.settings["nbr_meas"]): # for time-lapse monitoring
if self.status != 'running':
self.exec_logger.warning('Data acquisition interrupted')
break
t0 = time.time()
# create filename with timestamp
filename = self.settings["export_path"].replace('.csv',
f'_{datetime.now().strftime("%Y%m%dT%H%M%S")}.csv')
self.exec_logger.debug(f'Saving to {filename}')
# make sure all multiplexer are off
self.reset_mux()
# measure all quadrupole of the sequence
if self.sequence is None:
n = 1
else:
n = self.sequence.shape[0]
for i in range(0, n):
if self.sequence is None:
quad = np.array([0, 0, 0, 0])
else:
quad = self.sequence[i, :] # quadrupole
if self.status == 'stopping':
break
# call the switch_mux function to switch to the right electrodes
self.switch_mux_on(quad)
# run a measurement
acquired_data = self.run_measurement(quad, self.settings['nb_stack'],
self.settings['injection_duration'])
# switch mux off
self.switch_mux_off(quad)
# add command_id in dataset
acquired_data.update({'cmd_id': cmd_id})
# log data to the data logger
self.data_logger.info(f'{acquired_data}')
print(f'{acquired_data}')
# save data and print in a text file
self.append_and_save(filename, acquired_data)
self.exec_logger.debug(f'{i+1:d}/{n:d}')
# compute time needed to take measurement and subtract it from interval
# between two sequence run (= sequence_delay)
measuring_time = time.time() - t0
sleep_time = self.settings["sequence_delay"] - measuring_time
if sleep_time < 0:
# it means that the measuring time took longer than the sequence delay
sleep_time = 0
self.exec_logger.warning('The measuring time is longer than the sequence delay. '
'Increase the sequence delay')
# sleeping time between sequence
if self.settings["nbr_meas"] > 1:
time.sleep(sleep_time) # waiting for next measurement (time-lapse)
self.status = 'idle'
self.thread = threading.Thread(target=func)
self.thread.start()
def stop(self):
"""Stop the acquisition.
"""
self.status = 'stopping'
if self.thread is not None:
self.thread.join()
self.exec_logger.debug(f'Status: {self.status}')
def quit(self):
"""Quit OhmPi.
"""
self.cmd_listen = False
if self.cmd_thread is not None:
self.cmd_thread.join()
self.exec_logger.debug(f'Stopped listening to tcp port.')
exit()
VERSION = '2.1.5'
print(colored(r' ________________________________' + '\n' +
r'| _ | | | || \/ || ___ \_ _|' + '\n' +
r'| | | | |_| || . . || |_/ / | |' + '\n' +
r'| | | | _ || |\/| || __/ | |' + '\n' +
r'\ \_/ / | | || | | || | _| |_' + '\n' +
r' \___/\_| |_/\_| |_/\_| \___/ ', 'red'))
print('OhmPi start')
print('Version:', VERSION)
platform, on_pi = OhmPi.get_platform()
if on_pi:
print(colored(f'Running on {platform} platform', 'green'))
# TODO: check model for compatible platforms (exclude Raspberry Pi versions that are not supported...)
# and emit a warning otherwise
if not arm64_imports:
print(colored(f'Warning: Required packages are missing.\n'
f'Please run ./env.sh at command prompt to update your virtual environment\n', 'yellow'))
else:
print(colored(f'Not running on the Raspberry Pi platform.\nFor simulation purposes only...', 'yellow'))
current_time = datetime.now()
print(current_time.strftime("%Y-%m-%d %H:%M:%S"))
# for testing
if __name__ == "__main__":
ohmpi = OhmPi(settings=OHMPI_CONFIG['settings'])