updated data example

data_exemple_ardeche/hrudelin_config.cfg

-# -----------
-# environment
-# -----------
-
-[dir_in]
-dir:
-
-[dem]
-dem:
-
-
-[data]
-hgeo:
-landuse:
-soil:
-
-
-[gauges]
-gauges:
-#for watershed ID, used for identification of watersheds
-gauges_col_name=
-# drained surface
-gauges_area_col_name=
-relocated_gauges=
-
-
-[irrigation]
-# yes or no
-to_do:
-irrigation:
-irrig_col_name=
-#for irrig_col_type, 2 for groundwater and 3 for surfaceirrig_col_type=
-
-# you can indicate a minimum surface value for an HRU to be a GU:
-#minimum surface can be null, global (irrig_surf_min_GU) or spatialized (irrig_col_min_GU)
-irrig_surf_min_GU=
-irrig_col_min_GU=
-#you can specify a maximum distance search for GU (default is 5000 m
-irrig_distance_GU=5000
-
-irrigation_sector:
-irrig_sector_col_name=
-irrig_col_sau_irr=
-irrig_col_dom_sau_irr=
-irrigation_table:
-relocated_irrigation=
-
-[dams]
-# yes or no
-to_do:
-dams=
-dams_col_name=
-dams_smax=
-dams_s0=
-#drained surface
-dams_area_col_name=
-relocated_dams=
-
-[dir_out]
-files:
-results:
-# -------------------------
-# 1st step : hru-delin_init
-# -------------------------
-
-[surface]
-#selection: total -> full dem
-#           polygon -> polygon: name of the shapefile
-#           coords -> give the coords upper left (west and north) and lower right (east and south)
-selection:
-polygon:
-west:
-north:
-east:
-south:
-
-
-[demfill]
-#
-# if demfill = yes : depressionless DEM will be generated
-#               no : no action on input DEM 
-#
-demfill:
-
-#
-# if rules_auto_* = yes : rules will be calculated by the module
-# if no : fill the corresponding file (reclass_default_rules_*)
-#
-[reclass_dem]
-rules_auto_dem:
-step_dem:
-
-[reclass_slope]
-rules_auto_slope:
-
-[reclass_aspect]
-rules_auto_aspect:
-
-[basin_min_size]
-# minimum size of calculated watersheds (r.watershed)
-# number of pixels 
-#  size = N = SURFACE_km2 / ( RES_km2^2 )
-#  ex: S = 10km2, RES = 200m = 0.2 km  ==> N = 250 pixels
-#      S = 20km2, RES = 90m = 0.09 km ==> N = 2469 pixels
-size=
-
-# ---------------------------
-# 2nd step : hru-delin_basins
-# ---------------------------
-# So it's possible to specify a variable using : or = ???
-[auto_relocation]
-# yes or no
-to_do:
-#          -------- first rule
-# surface is in percent!
-# distance is in pixels: N = D / RES
-# example: for 3km distance with a 50m DEM, the number of pixel is: 3000/50 = 33 pixels
-surface_tolerance_1=
-distance_tolerance_1=
-#          -------- second rule  
-# second rule with a distance tolerance of 6km and a surface tolerance of 30%
-surface_tolerance_2=
-distance_tolerance_2=120
-
-# unit = 1 : m , = 2 : km
-area_unit=
-
-
-
-# ---------------------------
-# 3rd step : hru-delin_hrugen
-# ---------------------------
-
-[hrus_min_surface]
-# there, this is in pixel so pay attention to the DEM resolution 
-# same as for bassin_min_size: N = SURFACE_km2 / ( RES_km2^2 ) # see 'size' parameter in step 1 for examples
-# 2 km2 = 247 pixels
-surface=
-
-#
-# MNT-derived layers to be integrated in the overlay operation
-#
-[layer_overlay]
-# yes or no
-dem:
-slope:
-aspect:
-
-# --------------------------------
-# 4th step : hru-delin_parms_J2000
-# --------------------------------
-# yes or no
-[topology]
-dissolve_cycle:
-hru_no_topology_log:
-OF_domain_export:
-[hru_param]
-hru_cat:
-hru_landuse:

data_exemple_ardeche/hrudelin_config_ardeche.cfg

@@ -3,7 +3,7 @@
 # -----------
 
 [dir_in]
-dir:/home/michael.rabotin/temporaires/ardeche/data_exemple_ardeche
+dir:/home/michael.rabotin/temporaires/data_exemple_ardeche
 
 [dem]
 dem:ih_ardeche_dem50m_grass_1.tif
@@ -56,8 +56,8 @@ dams_area_col_name=S_BH
 relocated_dams=
 
 [dir_out]
-files:/home/michael.rabotin/temporaires/ardeche/data_exemple_ardeche/out_files
-results:/home/michael.rabotin/temporaires/ardeche/data_exemple_ardeche/out_results
+files:/home/michael.rabotin/temporaires/data_exemple_ardeche/out_files
+results:/home/michael.rabotin/temporaires/data_exemple_ardeche/out_results
 # -------------------------
 # 1st step : hru-delin_init
 # -------------------------
@@ -66,8 +66,8 @@ results:/home/michael.rabotin/temporaires/ardeche/data_exemple_ardeche/out_resul
 #selection: total -> full dem
 #           polygon -> polygon: name of the shapefile
 #           coords -> give the coords upper left (west and north) and lower right (east and south)
-selection:polygon
-polygon:boundaries.shp
+selection:total
+polygon:
 west:
 north:
 east: