An error occurred while loading the file. Please try again.
-
Olivier Kaufmann authored2977eb33
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
import matplotlib
matplotlib.use('TkAgg')
import importlib
import time
from ohmpi.utils import change_config
from ohmpi.plots import plot_exec_log
import logging
change_config('../configs/config_mb_2024_0_2.py', verbose=False)
# from ohmpi.hardware_components.mux_2024_0_X import Mux
from ohmpi.hardware_components import raspberry_pi as ctl_module
from ohmpi.config import HARDWARE_CONFIG
from ohmpi.logging_setup import add_logging_level
# MUX_CONFIG = HARDWARE_CONFIG['mux']
ctl_module = importlib.import_module(f'ohmpi.hardware_components.{HARDWARE_CONFIG["ctl"]["model"]}')
pwr_module = importlib.import_module(f'ohmpi.hardware_components.{HARDWARE_CONFIG["pwr"]["model"]}')
tx_module = importlib.import_module(f'ohmpi.hardware_components.{HARDWARE_CONFIG["tx"]["model"]}')
rx_module = importlib.import_module(f'ohmpi.hardware_components.{HARDWARE_CONFIG["rx"]["model"]}')
stand_alone = True # True
part_of_hardware_system = False
within_ohmpi = False
# Stand alone mux
if stand_alone:
ctl = ctl_module.Ctl()
HARDWARE_CONFIG['tx'].update({'ctl': ctl}) # HARDWARE_CONFIG['tx'].pop('ctl', ctl_module.Ctl())})
HARDWARE_CONFIG['rx'].update({'ctl': ctl}) # HARDWARE_CONFIG['rx'].pop('ctl', ctl_module.Ctl())})
HARDWARE_CONFIG['tx'].update({'connection': HARDWARE_CONFIG['tx'].pop('connection',
ctl.interfaces[
HARDWARE_CONFIG['tx'].pop(
'interface_name', 'i2c')])})
HARDWARE_CONFIG['rx'].update({'connection': HARDWARE_CONFIG['rx'].pop('connection',
ctl.interfaces[
HARDWARE_CONFIG['rx'].pop(
'interface_name', 'i2c')])})
print(HARDWARE_CONFIG['rx'], rx_module)
rx = rx_module.Rx(**HARDWARE_CONFIG['rx'])
tx = tx_module.Tx(**HARDWARE_CONFIG['tx'])
pwr = pwr_module.pwr(**HARDWARE_CONFIG['pwr'])
tx.polarity = 1
time.sleep(1)
tx.polarity = 0
# mux as part of a OhmPiHardware system
if part_of_hardware_system:
from ohmpi.hardware_system import OhmPiHardware
print('Starting test of mux as part of a OhmPiHardware system.')
k = OhmPiHardware()
k.exec_logger.setLevel(logging.DEBUG)
# Test mux switching
k.reset_mux()
k.switch_mux(electrodes=[1, 4, 2, 3], roles=['A', 'B', 'M', 'N'], state='on')
time.sleep(1.)
k.switch_mux(electrodes=[1, 4, 2, 3], roles=['A', 'B', 'M', 'N'], state='off')
if within_ohmpi:
from ohmpi.ohmpi import OhmPi
print('Starting test of mux within OhmPi.')
k = OhmPi()
#A, B, M, N = (32, 29, 31, 30)
k.reset_mux()
#k._hw.switch_mux([A, B, M, N], state='on')
#k._hw.vab_square_wave(12.,1., cycles=2)
#k._hw.switch_mux([A, B, M, N], state='off')
#k._hw.calibrate_rx_bias() # electrodes 1 4 2 3 should be connected to a reference circuit
#k._hw.rx._bias = -1.38
#print(f'Resistance: {k._hw.last_rho :.2f} ohm, dev. {k._hw.last_dev:.2f} %, rx bias: {k._hw.rx._bias:.2f} mV')
# k._hw._plot_readings()
A, B, M, N = (0, 0, 0, 0)
# k._hw.switch_mux([A, B, M, N], state='on')
# k._hw.vab_square_wave(12., cycle_duration=10., cycles=3)
# k._hw.switch_mux([A, B, M, N], state='off')
# print(f'OhmPiHardware Resistance: {k._hw.last_rho :.2f} ohm, dev. {k._hw.last_dev:.2f} %, rx bias: {k._hw.rx._bias:.2f} mV')
# k._hw._plot_readings()
print('using OhmPi')
d = k.run_measurement([A, B, M, N], injection_duration=1., nb_stack=2, duty_cycle=0.5)
print(d)
#k._hw._plot_readings()
print(f'OhmPiHardware: Resistance: {k._hw.last_resistance() :.2f} ohm, dev. {k._hw.last_dev():.2f} %, sp: {k._hw.sp:.2f} mV, rx bias: {k._hw.rx._bias:.2f} mV')
print(f'OhmPi: Resistance: {d["R [ohm]"] :.2f} ohm, dev. {d["R_std [%]"]:.2f} %, rx bias: {k._hw.rx._bias:.2f} mV')
k._hw._plot_readings(save_fig=False)
# plot_exec_log('ohmpi/logs/exec.log')
change_config('../configs/config_default.py', verbose=False)