Update config forohmpi card 3.15

config_ohmpi3.15.py

-import logging
-from OhmPi.utils import get_platform
-
-from paho.mqtt.client import MQTTv31
-
-_, on_pi = get_platform()
-# DEFINE THE ID OF YOUR OhmPi
-ohmpi_id = '0001' if on_pi else 'XXXX'
-# DEFINE YOUR MQTT BROKER (DEFAULT: 'localhost')
-mqtt_broker = 'localhost' if on_pi else 'NAME_YOUR_BROKER_WHEN_IN_SIMULATION_MODE_HERE'
-# DEFINE THE SUFFIX TO ADD TO YOUR LOGS FILES
-logging_suffix = ''
-
-# OhmPi configuration
-OHMPI_CONFIG = {
-    'id': ohmpi_id,  # Unique identifier of the OhmPi board (string)
-    # 'R_shunt': 2,  # Shunt resistance in Ohms
-    # 'Imax': 4800 / 50 / 2,  # Maximum current
-    # 'coef_p2': 2.50,  # slope for current conversion for ADS.P2, measurement in V/V
-    # 'nb_samples': 20,  # Max value 10 # was named integer before...
-    # 'version': 2,  # Is this still needed?
-    # 'max_elec': 64,
-    # 'board_addresses': {'A': 0x73, 'B': 0x72, 'M': 0x71, 'N': 0x70},  # CHECK IF YOUR BOARDS HAVE THESE ADDRESSES
-    'settings': 'ohmpi_settings.json',  # INSERT YOUR FAVORITE SETTINGS FILE HERE
-    # 'board_version': 'mb.2023.0.0',#,'22.10',
-    # 'mcp_board_address': 0x20
-}  # TODO: add a dictionary with INA models and associated gain values
-
-HARDWARE_CONFIG = {
-    'controller': {'model' : 'raspberry_pi_3'
-                   },
-    'tx' : {'model' : 'ohmpi_card_3.15',
-             'mcp_board_address': 0x20,
-             'current_max': 4800 / 50 / 2,  # Maximum current
-             'R_shunt': 2  # Shunt resistance in Ohms
-            },
-    'rx' : {'model': 'ohmpi_card_3.15',
-             'coef_p2': 2.50,  # slope for current conversion for ADS.P2, measurement in V/V
-             'nb_samples': 20,  # Max value 10 # was named integer before...
-            },
-    'mux': {'model' : 'dummy_mux',
-             'max_elec': 4,
-             'board_addresses': {'A': 0x73, 'B': 0x72, 'M': 0x71, 'N': 0x70},  # CHECK IF YOUR BOARDS HAVE THESE ADDRESSES
-             'voltage_max' : 100,
-             'current_max' : 3
-            }
-}
-
-# SET THE LOGGING LEVELS, MQTT BROKERS AND MQTT OPTIONS ACCORDING TO YOUR NEEDS
-# Execution logging configuration
-EXEC_LOGGING_CONFIG = {
-    'logging_level': logging.INFO,
-    'log_file_logging_level': logging.DEBUG,
-    'logging_to_console': True,
-    'file_name': f'exec{logging_suffix}.log',
-    'max_bytes': 262144,
-    'backup_count': 30,
-    'when': 'd',
-    'interval': 1
-}
-
-# Data logging configuration
-DATA_LOGGING_CONFIG = {
-    'logging_level': logging.INFO,
-    'logging_to_console': True,
-    'file_name': f'data{logging_suffix}.log',
-    'max_bytes': 16777216,
-    'backup_count': 1024,
-    'when': 'd',
-    'interval': 1
-}
-
-# State of Health logging configuration (For a future release)
-SOH_LOGGING_CONFIG = {
-    'logging_level': logging.INFO,
-    'logging_to_console': True,
-    'file_name': f'soh{logging_suffix}.log',
-    'max_bytes': 16777216,
-    'backup_count': 1024,
-    'when': 'd',
-    'interval': 1
-}
-
-# MQTT logging configuration parameters
-MQTT_LOGGING_CONFIG = {
-    'hostname': mqtt_broker,
-    'port': 1883,
-    'qos': 2,
-    'retain': False,
-    'keepalive': 60,
-    'will': None,
-    'auth': {'username': 'mqtt_user', 'password': 'mqtt_password'},
-    'tls': None,
-    'protocol': MQTTv31,
-    'transport': 'tcp',
-    'client_id': f'{OHMPI_CONFIG["id"]}',
-    'exec_topic': f'ohmpi_{OHMPI_CONFIG["id"]}/exec',
-    'exec_logging_level': logging.DEBUG,
-    'data_topic': f'ohmpi_{OHMPI_CONFIG["id"]}/data',
-    'data_logging_level': DATA_LOGGING_CONFIG['logging_level'],
-    'soh_topic': f'ohmpi_{OHMPI_CONFIG["id"]}/soh',
-    'soh_logging_level': SOH_LOGGING_CONFIG['logging_level']
-}
-
-# MQTT control configuration parameters
-MQTT_CONTROL_CONFIG = {
-    'hostname': mqtt_broker,
-    'port': 1883,
-    'qos': 2,
-    'retain': False,
-    'keepalive': 60,
-    'will': None,
-    'auth': {'username': 'mqtt_user', 'password': 'mqtt_password'},
-    'tls': None,
-    'protocol': MQTTv31,
-    'transport': 'tcp',
-    'client_id': f'{OHMPI_CONFIG["id"]}',
-    'ctrl_topic': f'ohmpi_{OHMPI_CONFIG["id"]}/ctrl'
-}