modification de la fonction switch_mux(): lors de l'activation des port, il...

modification de la fonction switch_mux(): lors de l'activation des port, il faut forcer le type des variables pour qu'elles ne soient pas du type array.

ohmpy_v_1_01.py

 """
-23/08/2019
+29/10/2019
 OHMPY_code is a program to control the low-cost and open source resistivity meter
 OHMPY, it has been developed by Rémi CLEMENT, Nicolas FORQUET (IRSTEA) and Yannick FARGIER (IFSTTAR).
 Version 1.01 23/08/2019 modified by Remi CLEMENT
@@ -27,12 +27,12 @@ def switch_mux(quadripole):
     quadmux = numpy.loadtxt("quadmux.txt", delimiter=" ", dtype=int)
     for i in range(0,4):
         for j in range(0,5) :
-            GPIO.output(quadmux[i,j], path2elec[quadripole[i],j])
+            GPIO.output(int(quadmux[i,j]), bool(path2elec[quadripole[i],j]))
 
 
 GPIO.setmode(GPIO.BCM)
 GPIO.setwarnings(False)
- 
+
 #i2c = busio.I2C(board.SCL, board.SDA)
 # Create the ADC object using the I2C bus
 #ads = ADS.ADS1115(i2c)
@@ -41,8 +41,8 @@ GPIO.setwarnings(False)
 Initialization of multiplexer channels
 """
 pinList = [12,16,20,21,26,18,23,24,25,19,6,13,4,17,27,22,10,9,11,5] # List of GPIOs enabled for relay cards (electrodes)
-for i in pinList: 
-    GPIO.setup(i, GPIO.OUT) 
+for i in pinList:
+    GPIO.setup(i, GPIO.OUT)
     GPIO.output(i, GPIO.HIGH)
 """
 Measurement settings
@@ -58,23 +58,19 @@ Reading the quadripole file
 N=numpy.loadtxt("ABMN4.txt", delimiter=" ",dtype=int) # load quadripole file
 
 for g in range(0,nbr_meas): # for time-lapse monitoring
-  
+
     """
     Selection electrode activées pour chaque quadripole
     """
     for i in range(0,N.shape[0]): # boucle sur les quadripôles, qui tient compte du nombre de quadripole dans le fichier ABMN
         # call switch_mux function
         switch_mux(N[i,])
-        
-        time.sleep(injection_time);  
-        GPIO.output(12, GPIO.HIGH); GPIO.output(16, GPIO.HIGH); GPIO.output(20, GPIO.HIGH); GPIO.output(21, GPIO.HIGH); GPIO.output(26, GPIO.HIGH)              
-        GPIO.output(18, GPIO.HIGH); GPIO.output(23, GPIO.HIGH); GPIO.output(24, GPIO.HIGH); GPIO.output(25, GPIO.HIGH); GPIO.output(19, GPIO.HIGH) 
+
+        time.sleep(injection_time);
+        GPIO.output(12, GPIO.HIGH); GPIO.output(16, GPIO.HIGH); GPIO.output(20, GPIO.HIGH); GPIO.output(21, GPIO.HIGH); GPIO.output(26, GPIO.HIGH)
+        GPIO.output(18, GPIO.HIGH); GPIO.output(23, GPIO.HIGH); GPIO.output(24, GPIO.HIGH); GPIO.output(25, GPIO.HIGH); GPIO.output(19, GPIO.HIGH)
         GPIO.output(6, GPIO.HIGH); GPIO.output(13, GPIO.HIGH); GPIO.output(4, GPIO.HIGH); GPIO.output(17, GPIO.HIGH); GPIO.output(27, GPIO.HIGH)
         GPIO.output(22, GPIO.HIGH); GPIO.output(10, GPIO.HIGH); GPIO.output(9, GPIO.HIGH); GPIO.output(11, GPIO.HIGH); GPIO.output(5, GPIO.HIGH)
-    
-'''
-Showing results
-'''
 
 
     time.sleep(sequence_delay);#waiting next measurement
@@ -86,12 +82,3 @@ Showing results
 Save result in txt file
 '''
 
- 
-
-
-    
-
-
-
-
-