Skip to content
GitLab
Commit 410c89e9 authored by Arnaud WATLET's avatar Arnaud WATLET
Browse files

Updates config_mb2023_0_2__3_mux_2024_dps

parent bd795682
master 144-create-testing-framework-for-tests-automation code_refactor dev/dummy v2024_rc v2025_alpha v2024.0.35 v2024.0.34 v2024.0.33 v2024.0.32 v2024.0.31 v2024.0.30 v2024.0.29 v2024.0.28 v2024.0.27 v2024.0.26 v2024.0.25 v2024.0.24 v2024.0.23 v2024.0.22 v2024.0.21 v2024.0.20 v2024.0.19 v2024.0.18 v2024.0.17 v2024.0.16 v2024.0.15 v2024.0.14 v2024.0.13 v2024.0.12 v2024.0.11 v2024.0.10 v2024.0.9 v2024.0.8 v2024.0.7 v2024.0.0
No related merge requests found
Hide whitespace changes
Inline Side-by-side
Showing
with 180 additions and 29 deletions
+180 -29
configs/config_mb_2023_3_mux_2024.py
+ 33
− 29
View file @ 410c89e9
......@@ -19,7 +19,7 @@ OHMPI_CONFIG = {
HARDWARE_CONFIG = {
'ctl': {'model': 'raspberry_pi'},
'pwr': {'model': 'pwr_batt', 'voltage': 12.},
'pwr': {'model': 'pwr_batt', 'voltage': 12.,'interface_name':'none'},
'tx': {'model': 'mb_2023_0_X',
'voltage_max': 12., # Maximum voltage supported by the TX board [V]
'adc_voltage_max': 4800., # Maximum voltage read by the current ADC on the TX board [mA]
......@@ -36,34 +36,38 @@ HARDWARE_CONFIG = {
# if defined in board specs, values out of specs will be bounded to remain in specs
# omitted properties in config will be set to board specs default values if they exist
{'boards':
{'mux_02':
{'model': 'mux_2024_0_X',
'tca_address': None,
'tca_channel': 0,
'mcp_0': '0x22', # TODO: Replace this with pos of jumper on MUX board (address doesn't mean anything for the average user...)
'mcp_1': '0x23', # TODO: Replace this with pos of jumper on MUX board (address doesn't mean anything for the average user...)
'roles': {'A': 'X', 'B': 'Y', 'M': 'XX', 'N': 'YY'},
'cabling': {(i+8, j): ('mux_02', i) for j in ['A', 'B', 'M', 'N'] for i in range(1, 9)},
'voltage_max': 12.},
'mux_00':
{'model': 'mux_2024_0_X',
'tca_address': None,
'tca_channel': 0,
'mcp_0': '0x24', # TODO : Replace this with pos of jumper on MUX board (address doesn't mean anything for the average user...)
'mcp_1': '0x25', # TODO : Replace this with pos of jumper on MUX board (address doesn't mean anything for the average user...)
'roles': {'A': 'X', 'B': 'Y', 'M': 'XX', 'N': 'YY'},
'cabling': {(i+16, j): ('mux_00', i) for j in ['A', 'B', 'M', 'N'] for i in range(1, 9)},
'voltage_max': 12.},
'mux_04':
{'model': 'mux_2024_0_X',
'tca_address': None,
'tca_channel': 0,
'mcp_0': '0x26', # TODO : Replace this with pos of jumper on MUX board (address doesn't mean anything for the average user...
'mcp_1': '0x27', # TODO : Replace this with pos of jumper on MUX board (address doesn't mean anything for the average user...)
'roles': {'A': 'X', 'B': 'Y', 'M': 'XX', 'N': 'YY'},
'cabling': {(i+24, j): ('mux_04', i) for j in ['A', 'B', 'M', 'N'] for i in range(1, 9)},
'voltage_max': 12.}
},
{'mux_02':
{'model': 'mux_2024_0_X',
'tca_address': None,
'tca_channel': 0,
'addr2': 'up',
'addr1': 'up',
# 'mcp_0': '0x26',
# 'mcp_1': '0x27',
'roles': {'A': 'X', 'B': 'Y', 'M': 'XX', 'N': 'YY'},
'cabling': {(i + 8, j): ('mux_02', i) for j in ['A', 'B', 'M', 'N'] for i in range(1, 9)},
'voltage_max': 50.},
'mux_03':
{'model': 'mux_2024_0_X',
'tca_address': None,
'tca_channel': 0,
'addr2': 'down',
'addr1': 'up',
# 'mcp_0': '0x26',
# 'mcp_1': '0x27',
'roles': {'A': 'X', 'B': 'Y', 'M': 'XX', 'N': 'YY'},
'cabling': {(i + 16, j): ('mux_03', i) for j in ['A', 'B', 'M', 'N'] for i in range(1, 9)},
'voltage_max': 50.},
'mux_05':
{'model': 'mux_2024_0_X',
'tca_address': None,
'tca_channel': 0,
'addr2': 'up',
'addr1': 'down',
'roles': {'A': 'X', 'B': 'Y', 'M': 'XX', 'N': 'YY'},
'cabling': {(i + 0, j): ('mux_05', i) for j in ['A', 'B', 'M', 'N'] for i in range(1, 9)},
'voltage_max': 50.},
},
'default': {'interface_name': 'i2c',
'voltage_max': 100.,
'current_max': 3.}
......
configs/config_mb_2023__3_mux_2024_dps5005.py 0 → 100644
+ 147
− 0
View file @ 410c89e9
import logging
from ohmpi.utils import get_platform
from paho.mqtt.client import MQTTv31 # noqa
_, on_pi = get_platform()
# DEFINE THE ID OF YOUR OhmPi
ohmpi_id = '0001' if on_pi else 'XXXX'
# DEFINE YOUR MQTT BROKER (DEFAULT: 'localhost')
mqtt_broker = 'localhost' if on_pi else 'NAME_YOUR_BROKER_WHEN_IN_SIMULATION_MODE_HERE'
# DEFINE THE SUFFIX TO ADD TO YOUR LOGS FILES
logging_suffix = ''
# OhmPi configuration
OHMPI_CONFIG = {
'id': ohmpi_id, # Unique identifier of the OhmPi board (string)
'settings': 'ohmpi_settings.json', # INSERT YOUR FAVORITE SETTINGS FILE HERE
}
HARDWARE_CONFIG = {
'ctl': {'model': 'raspberry_pi'},
'pwr': {'model': 'pwr_batt', 'voltage': 12., 'interface_name': 'none'},
'tx': {'model': 'mb_2023_0_X',
'voltage_max': 12., # Maximum voltage supported by the TX board [V]
'adc_voltage_max': 4800., # Maximum voltage read by the current ADC on the TX board [mA]
'r_shunt': 2., # Shunt resistance in Ohms
'interface_name': 'i2c',
},
'rx': {'model': 'mb_2023_0_X',
'coef_p2': 2.50, # slope for conversion for ADS, measurement in V/V
'sampling_rate': 50., # number of samples per second
'interface_name': 'i2c',
},
'mux': # default properties given in config are system properties that will be
# overwritten by properties defined in each the board dict below.
# if defined in board specs, values out of specs will be bounded to remain in specs
# omitted properties in config will be set to board specs default values if they exist
{'boards': {'mux_02':
{'model': 'mux_2024_0_X',
'tca_address': None,
'tca_channel': 0,
'addr2': 'up',
'addr1': 'up',
# 'mcp_0': '0x26',
# 'mcp_1': '0x27',
'roles': {'A': 'X', 'B': 'Y', 'M': 'XX', 'N': 'YY'},
'cabling': {(i+8, j): ('mux_02', i) for j in ['A', 'B', 'M', 'N'] for i in range(1, 9)},
'voltage_max': 50.},
'mux_03':
{'model': 'mux_2024_0_X',
'tca_address': None,
'tca_channel': 0,
'addr2': 'down',
'addr1': 'up',
# 'mcp_0': '0x26',
# 'mcp_1': '0x27',
'roles': {'A': 'X', 'B': 'Y', 'M': 'XX', 'N': 'YY'},
'cabling': {(i+16, j): ('mux_03', i) for j in ['A', 'B', 'M', 'N'] for i in range(1, 9)},
'voltage_max': 50.},
'mux_05':
{'model': 'mux_2024_0_X',
'tca_address': None,
'tca_channel': 0,
'addr2': 'up',
'addr1': 'down',
'roles': {'A': 'X', 'B': 'Y', 'M': 'XX', 'N': 'YY'},
'cabling': {(i+0, j): ('mux_05', i) for j in ['A', 'B', 'M', 'N'] for i in range(1, 9)},
'voltage_max': 50.},
},
'default': {'interface_name': 'i2c',
'voltage_max': 100.,
'current_max': 3.}
}
}
# SET THE LOGGING LEVELS, MQTT BROKERS AND MQTT OPTIONS ACCORDING TO YOUR NEEDS
# Execution logging configuration
EXEC_LOGGING_CONFIG = {
'logging_level': logging.DEBUG, # TODO: set logging level back to INFO
'log_file_logging_level': logging.DEBUG,
'logging_to_console': True,
'file_name': f'exec{logging_suffix}.log',
'max_bytes': 262144,
'backup_count': 30,
'when': 'd',
'interval': 1
}
# Data logging configuration
DATA_LOGGING_CONFIG = {
'logging_level': logging.INFO,
'logging_to_console': True,
'file_name': f'data{logging_suffix}.log',
'max_bytes': 16777216,
'backup_count': 1024,
'when': 'd',
'interval': 1
}
# State of Health logging configuration (For a future release)
SOH_LOGGING_CONFIG = {
'logging_level': logging.INFO,
'logging_to_console': True,
'log_file_logging_level': logging.DEBUG,
'file_name': f'soh{logging_suffix}.log',
'max_bytes': 16777216,
'backup_count': 1024,
'when': 'd',
'interval': 1
}
# MQTT logging configuration parameters
MQTT_LOGGING_CONFIG = {
'hostname': mqtt_broker,
'port': 1883,
'qos': 2,
'retain': False,
'keepalive': 60,
'will': None,
'auth': {'username': 'mqtt_user', 'password': 'mqtt_password'},
'tls': None,
'protocol': MQTTv31,
'transport': 'tcp',
'client_id': f'{OHMPI_CONFIG["id"]}',
'exec_topic': f'ohmpi_{OHMPI_CONFIG["id"]}/exec',
'exec_logging_level': logging.DEBUG,
'data_topic': f'ohmpi_{OHMPI_CONFIG["id"]}/data',
'data_logging_level': DATA_LOGGING_CONFIG['logging_level'],
'soh_topic': f'ohmpi_{OHMPI_CONFIG["id"]}/soh',
'soh_logging_level': SOH_LOGGING_CONFIG['logging_level']
}
# MQTT control configuration parameters
MQTT_CONTROL_CONFIG = {
'hostname': mqtt_broker,
'port': 1883,
'qos': 2,
'retain': False,
'keepalive': 60,
'will': None,
'auth': {'username': 'mqtt_user', 'password': 'mqtt_password'},
'tls': None,
'protocol': MQTTv31,
'transport': 'tcp',
'client_id': f'{OHMPI_CONFIG["id"]}',
'ctrl_topic': f'ohmpi_{OHMPI_CONFIG["id"]}/ctrl'
}
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment