Updates test

dev/test_mb_2024_4_mux_2024.py

@@ -105,12 +105,12 @@ if within_ohmpi:
     # k._hw.switch_mux([A, B, M, N], state='off')
     # print(f'OhmPiHardware Resistance: {k._hw.last_rho :.2f} ohm, dev. {k._hw.last_dev:.2f} %, rx bias: {k._hw.rx._bias:.2f} mV')
     # k._hw._plot_readings()
-    k.load_sequence('sequences/9991_GRAD_16_s1_a1.txt')
-    k.run_sequence(tx_volt=5, injection_duration=1., nb_stack=2, duty_cycle=0.5)
+    # k.load_sequence('sequences/9991_GRAD_16_s1_a1.txt')
+    # k.run_sequence(tx_volt=5, injection_duration=1., nb_stack=2, duty_cycle=0.5)
     print('using OhmPi')
-    #d = k.run_measurement([A, B, M, N], injection_duration=1., nb_stack=2, duty_cycle=0.5)
+    d = k.run_measurement([A, B, M, N], injection_duration=3., nb_stack=2, duty_cycle=0.5, tx_volt=5.)
     # print(d)
-    # k._hw._plot_readings()
+    k._hw._plot_readings()
     print(f'OhmPiHardware: Resistance: {k._hw.last_resistance() :.2f} ohm, dev. {k._hw.last_dev():.2f} %, sp: {k._hw.sp:.2f} mV, rx bias: {k._hw.rx._bias:.2f} mV')
     print(f'OhmPi: Resistance: {d["R [ohm]"] :.2f} ohm, dev. {d["R_std [%]"]:.2f} %, rx bias: {k._hw.rx._bias:.2f} mV')
     # k._hw._plot_readings(save_fig=False)

ohmpi/hardware_components/mb_2024_0_2.py

@@ -26,7 +26,7 @@ SPECS = {'rx': {'model': {'default': os.path.basename(__file__).rstrip('.py')},
          'tx': {'model': {'default': os.path.basename(__file__).rstrip('.py')},
                 'adc_voltage_min': {'default': 10.},  # Minimum voltage value used in vmin strategy
                 'adc_voltage_max': {'default': 4500.},  # Maximum voltage on ads1115 used to measure current
-                'voltage_max': {'min': 0., 'default': 12., 'max': 12.},  # Maximum input voltage
+                'voltage_max': {'min': 0., 'default': 12., 'max': 50.},  # Maximum input voltage
                 'data_rate': {'default': 860.},
                 'mcp_address': {'default': 0x21},
                 'ads_address': {'default': 0x48},