Replaces OhmPi imports with ohmpi imports

doc/mux_2024_rev_0_0.py

-from OhmPi.config import HARDWARE_CONFIG
-import os
-from OhmPi.hardware_components import MuxAbstract
-MUX_CONFIG = HARDWARE_CONFIG['mux']
-
-class Mux(MuxAbstract):
-    def __init__(self, **kwargs):
-        kwargs.update({'board_name': os.path.basename(__file__).rstrip('.py')})
-        super().__init__(**kwargs)
-        self.max_elec = MUX_CONFIG['max_elec']
-
-    def switch_one(self, elec, role, state='off'):
-        self.tca = adafruit_tca9548a.TCA9548A(i2c, self.addresses[role])
-        # find I2C address of the electrode and corresponding relay
-        # considering that one MCP23017 can cover 16 electrodes
-        i2c_address = 7 - (elec - 1) // 16  # quotient without rest of the division
-        relay = (elec - 1) - ((elec - 1) // 16) * 16
-
-        if i2c_address is not None:
-            # select the MCP23017 of the selected MUX board
-            mcp = MCP23017(self.tca[i2c_address])
-            mcp.get_pin(relay - 1).direction = digitalio.Direction.OUTPUT
-            if state == 'on':
-                mcp.get_pin(relay - 1).value = True
-            else:
-                mcp.get_pin(relay - 1).value = False
-            # exec_logger.debug(f'Switching relay {relay} '
-            #                        f'({str(hex(self.addresses[role]))}) on:{on} for electrode {elec}')
-        else:
-            raise ValueError('No I2C address found for the electrode'
-                             ' {:d} on board {:s}'.format(elec, self.addresses[role]))
-            # exec_logger.warning(f'Unable to address electrode nr {elec}')
-
-    def switch(self, elecdic={}, state='on'):
-        """Switch a given list of electrodes with different roles.
-        Electrodes with a value of 0 will be ignored.
-
-        Parameters
-        ----------
-        elecdic : dictionary, optional
-            Dictionnary of the form: role: [list of electrodes].
-        state : str, optional
-            Either 'on' or 'off'.
-        """
-        # check to prevent A == B (SHORT-CIRCUIT)
-        if 'A' in elecdic and 'B' in elecdic:
-            out = np.in1d(elecdic['A'], elecdic['B'])
-            if out.any():
-                raise ValueError('Some electrodes have A == B -> SHORT-CIRCUIT')
-                return
-
-        # check none of M and N are the same A or B
-        # as to prevent burning the MN part which cannot take
-        # the full voltage of the DPS
-        if 'A' in elecdic and 'B' in elecdic and 'M' in elecdic and 'N' in elecdic:
-            if (np.in1d(elecdic['M'], elecdic['A']).any()
-                    or np.in1d(elecdic['M'], elecdic['B']).any()
-                    or np.in1d(elecdic['N'], elecdic['A']).any()
-                    or np.in1d(elecdic['N'], elecdic['B']).any()):
-                raise ValueError('Some electrodes M and N are on A and B -> cannot be with DPS')
-                return
-
-        # if all ok, then switch the electrodes
-        for role in elecdic:
-            for elec in elecdic[role]:
-                if elec > 0:
-                    self.switch_one(elec, role, state)
-
-    def reset(self):
-        for role in self.addresses:
-            for elec in range(self.nelec):
-                self.switch_one(elec, role, 'off')
\ No newline at end of file

ohmpi/hardware_components/mb_2024_rev_0_0.py

@@ -9,7 +9,7 @@ import time
 import numpy as np
 import os
 from ohmpi.hardware_components import TxAbstract, RxAbstract
-ctl_module = importlib.import_module(f'OhmPi.hardware_components.{HARDWARE_CONFIG["hardware"]["ctl"]["model"]}')
+ctl_module = importlib.import_module(f'ohmpi.hardware_components.{HARDWARE_CONFIG["hardware"]["ctl"]["model"]}')
 
 TX_CONFIG = HARDWARE_CONFIG['tx']
 RX_CONFIG = HARDWARE_CONFIG['rx']

ohmpi/hardware_components/ohmpi_card_3_15.py

@@ -11,7 +11,7 @@ import numpy as np
 import os
 from ohmpi.hardware_components import TxAbstract, RxAbstract
 ctl_name = HARDWARE_CONFIG['ctl'].pop('board_name', 'raspberry_pi_i2c')
-ctl_module = importlib.import_module(f'OhmPi.hardware_components.{ctl_name}')
+ctl_module = importlib.import_module(f'ohmpi.hardware_components.{ctl_name}')
 
 TX_CONFIG = HARDWARE_CONFIG['tx']
 RX_CONFIG = HARDWARE_CONFIG['rx']