update software do

c

configs/config_example.py

@@ -43,8 +43,10 @@ HARDWARE_CONFIG = {
                       'addr2': 'down',
                       },
                 'mux_01':
-                     {'model': 'mux_2023_0_X',
-                      'electrodes': range(1, 64)+16,
+                    {'model': 'mux_2023_0_X',
+                     'electrodes': range(17, 65 + 16),
+                     'roles': 'A',
+                     'mux_tca_address': 0x71
                      }
                  },
              'default': {'interface_name': 'i2c_ext',
@@ -132,144 +134,3 @@ MQTT_CONTROL_CONFIG = {
     'client_id': f'{OHMPI_CONFIG["id"]}',
     'ctrl_topic': f'ohmpi_{OHMPI_CONFIG["id"]}/ctrl'
 }
-import logging
-from ohmpi.utils import get_platform
-
-from paho.mqtt.client import MQTTv31  # noqa
-
-_, on_pi = get_platform()
-# DEFINE THE ID OF YOUR OhmPi
-ohmpi_id = '0001' if on_pi else 'XXXX'
-# DEFINE YOUR MQTT BROKER (DEFAULT: 'localhost')
-mqtt_broker = 'localhost' if on_pi else 'NAME_YOUR_BROKER_WHEN_IN_SIMULATION_MODE_HERE'
-# DEFINE THE SUFFIX TO ADD TO YOUR LOGS FILES
-logging_suffix = ''
-
-# OhmPi configuration
-OHMPI_CONFIG = {
-    'id': ohmpi_id,  # Unique identifier of the OhmPi board (string)
-    'settings': 'ohmpi_settings.json',  # INSERT YOUR FAVORITE SETTINGS FILE HERE
-}
-
-r_shunt = 2.
-HARDWARE_CONFIG = {
-    'ctl': {'model': 'raspberry_pi'},
-    'pwr': {'model': 'pwr_batt', 'voltage': 12., 'interface_name': 'none'},
-    'tx':  {'model': 'mb_2024_0_2',
-             'voltage_max': 50.,  # Maximum voltage supported by the TX board [V]
-             'current_max': 4.80/(50*r_shunt),  # Maximum voltage read by the current ADC on the TX board [A]
-             'r_shunt': r_shunt,  # Shunt resistance in Ohms
-             'interface_name': 'i2c'
-            },
-    'rx':  {'model': 'mb_2024_0_2',
-             'latency': 0.010,  # latency in seconds in continuous mode
-             'sampling_rate': 50,  # number of samples per second
-             'interface_name': 'i2c'
-            },
-    'mux': {'boards':
-                {'mux_00':
-                     {'model': 'mux_2024_0_X',
-                      'electrodes': range(1, 17),
-                      'roles': ['A', 'B', 'M', 'N'],
-                      'tca_address': None,
-                      'tca_channel': 0,
-                      'addr1': 'down',
-                      'addr2': 'down',
-                      },
-                 'mux_01':
-                     {'model': 'mux_2023_0_X',
-                      'electrodes': range(17, 65+16),
-                      'roles': 'A',
-                      'mux_tca_address': 0x71
-                     }
-                 },
-             'default': {'interface_name': 'i2c_ext',
-                         'voltage_max': 50.,
-                         'current_max': 3.}
-            }
-    }
-
-'''
-    Dictionary configuring the hardware system. This is where the five modules are declared and assembled together.
-  
-    Parameters
-    ----------
-    'ctl' contains informationb related to controller unit with the following keys:
-    'ctl': dict
-           'model': string, model type of the controller. Currently only 'raspberry_pi"
-    'pwr': dict
-            'model': string, model type of the power module. 'pwr_batt', 'pwr_dps5005"
-'''
-
-# SET THE LOGGING LEVELS, MQTT BROKERS AND MQTT OPTIONS ACCORDING TO YOUR NEEDS
-# Execution logging configuration
-EXEC_LOGGING_CONFIG = {
-    'logging_level': logging.INFO,
-    'log_file_logging_level': logging.DEBUG,
-    'logging_to_console': True,
-    'file_name': f'exec{logging_suffix}.log',
-    'max_bytes': 262144,
-    'backup_count': 30,
-    'when': 'd',
-    'interval': 1
-}
-
-# Data logging configuration
-DATA_LOGGING_CONFIG = {
-    'logging_level': logging.INFO,
-    'logging_to_console': True,
-    'file_name': f'data{logging_suffix}.log',
-    'max_bytes': 16777216,
-    'backup_count': 1024,
-    'when': 'd',
-    'interval': 1
-}
-
-# State of Health logging configuration (For a future release)
-SOH_LOGGING_CONFIG = {
-    'logging_level': logging.INFO,
-    'log_file_logging_level': logging.DEBUG,
-    'logging_to_console': True,
-    'file_name': f'soh{logging_suffix}.log',
-    'max_bytes': 16777216,
-    'backup_count': 1024,
-    'when': 'd',
-    'interval': 1
-}
-
-# MQTT logging configuration parameters
-MQTT_LOGGING_CONFIG = {
-    'hostname': mqtt_broker,
-    'port': 1883,
-    'qos': 2,
-    'retain': False,
-    'keepalive': 60,
-    'will': None,
-    'auth': {'username': 'mqtt_user', 'password': 'mqtt_password'},
-    'tls': None,
-    'protocol': MQTTv31,
-    'transport': 'tcp',
-    'client_id': f'{OHMPI_CONFIG["id"]}',
-    'exec_topic': f'ohmpi_{OHMPI_CONFIG["id"]}/exec',
-    'exec_logging_level': logging.DEBUG,
-    'data_topic': f'ohmpi_{OHMPI_CONFIG["id"]}/data',
-    'data_logging_level': DATA_LOGGING_CONFIG['logging_level'],
-    'soh_topic': f'ohmpi_{OHMPI_CONFIG["id"]}/soh',
-    'soh_logging_level': SOH_LOGGING_CONFIG['logging_level']
-}
-
-# MQTT control configuration parameters
-MQTT_CONTROL_CONFIG = {
-    'hostname': mqtt_broker,
-    'port': 1883,
-    'qos': 2,
-    'retain': False,
-    'keepalive': 60,
-    'will': None,
-    'auth': {'username': 'mqtt_user', 'password': 'mqtt_password'},
-    'tls': None,
-    'protocol': MQTTv31,
-    'transport': 'tcp',
-    'client_id': f'{OHMPI_CONFIG["id"]}',
-    'ctrl_topic': f'ohmpi_{OHMPI_CONFIG["id"]}/ctrl'
-}