Add test for mb2023 alone

dev/test_mb_2023_0_mux.py

+import matplotlib
+matplotlib.use('TkAgg')
+from ohmpi.utils import change_config
+change_config('../configs/config_mb_2023.py', verbose=False)
+import importlib
+import time
+import logging
+from ohmpi.config import HARDWARE_CONFIG
+
+stand_alone = False
+part_of_hardware_system = False
+within_ohmpi = True
+
+# Stand alone
+if stand_alone:
+
+    ctl_module = importlib.import_module(f'ohmpi.hardware_components.{HARDWARE_CONFIG["ctl"].pop("model")}')
+    pwr_module = importlib.import_module(f'ohmpi.hardware_components.{HARDWARE_CONFIG["pwr"].pop("model")}')
+    tx_module = importlib.import_module(f'ohmpi.hardware_components.{HARDWARE_CONFIG["tx"].pop("model")}')
+    rx_module = importlib.import_module(f'ohmpi.hardware_components.{HARDWARE_CONFIG["rx"].pop("model")}')
+
+    ctl = ctl_module.Ctl()
+    HARDWARE_CONFIG['tx'].update({'ctl': ctl, 'exec_logger': ctl.exec_logger, 'soh_logger': ctl.soh_logger})
+    HARDWARE_CONFIG['rx'].update({'ctl': ctl, 'exec_logger': ctl.exec_logger, 'soh_logger': ctl.soh_logger})
+    HARDWARE_CONFIG['tx'].update({'connection': HARDWARE_CONFIG['tx'].pop('connection',
+                                                                          ctl.interfaces[
+                                                                              HARDWARE_CONFIG['tx'].pop(
+                                                                                  'interface_name', 'i2c')])})
+    HARDWARE_CONFIG['rx'].update({'connection': HARDWARE_CONFIG['rx'].pop('connection',
+                                                                          ctl.interfaces[
+                                                                              HARDWARE_CONFIG['rx'].pop(
+                                                                                  'interface_name', 'i2c')])})
+
+    HARDWARE_CONFIG['pwr'].update({'connection': HARDWARE_CONFIG['pwr'].pop('connection',
+                                                                          ctl.interfaces[
+                                                                              HARDWARE_CONFIG['pwr'].pop(
+                                                                                  'interface_name', None)])})
+
+
+    rx = rx_module.Rx(**HARDWARE_CONFIG['rx'])
+    tx = tx_module.Tx(**HARDWARE_CONFIG['tx'])
+    pwr = pwr_module.Pwr(**HARDWARE_CONFIG['pwr'])
+    
+    # mux_ids = ['mux_02', 'mux_05']
+    # for m,mux_id in enumerate(mux_ids):
+    #     mux_module = importlib.import_module(
+    #         f'ohmpi.hardware_components.{HARDWARE_CONFIG["mux"]["boards"][mux_id].pop("model")}')
+
+    #     MUX_CONFIG = HARDWARE_CONFIG['mux']['boards'][mux_id]
+
+    #     MUX_CONFIG.update({'ctl': ctl, 'connection': MUX_CONFIG.pop('connection', ctl.interfaces[
+    #                                        MUX_CONFIG.pop('interface_name', 'i2c_ext')]), 'exec_logger': ctl.exec_logger,
+    #                    'soh_logger': ctl.soh_logger})
+    #     MUX_CONFIG.update({'id': mux_id})
+    #     mux = mux_module.Mux(**MUX_CONFIG)
+
+    #     # tx.polarity = 1
+    #     # time.sleep(1)
+    #     # tx.polarity = 0
+    #     # mux.switch(elec_dict={'A': [1], 'B': [4], 'M': [2], 'N': [3]}, state='on')
+    #     # time.sleep(1)
+    #     # voltage = rx.voltage
+    #     # current = tx.current
+    #     # mux.switch(elec_dict={'A': [1], 'B': [4], 'M': [2], 'N': [3]}, state='off')
+    #     # print(f'Resistance: {voltage / current :.2f} ohm, voltage: {voltage:.2f} mV, current: {current:.2f} mA')
+    #     mux.reset()
+    #     mux.test({'A': [i+8*m for i in range(1, 9)], 'B': [i+8*m for i in range(1, 9)],
+    #               'M': [i+8*m for i in range(1, 9)], 'N': [i+8*m for i in range(1, 9)]}, activation_time=.1)
+    #     mux.reset()
+
+# mux as part of a OhmPiHardware system
+if part_of_hardware_system:
+    from ohmpi.hardware_system import OhmPiHardware
+    print('Starting test of as part of an OhmPiHardware system.')
+    # mux_id = 'mux_03'
+    k = OhmPiHardware()
+    k.exec_logger.setLevel(logging.DEBUG)
+    # Test mux switching
+    k.reset_mux()
+    # k.switch_mux(electrodes=[1, 4, 2, 3], roles=['A', 'B', 'M', 'N'], state='on')
+    # time.sleep(1.)
+    # k.switch_mux(electrodes=[1, 4, 2, 3], roles=['A', 'B', 'M', 'N'], state='off')
+    # k.mux_boards[mux_id].test(activation_time=.4)
+    k.test_mux()
+    k.reset_mux()
+
+if within_ohmpi:
+    from ohmpi.ohmpi import OhmPi
+    # from ohmpi.plots import plot_exec_log
+
+    print('Starting test with OhmPi.')
+    k = OhmPi()
+    # A, B, M, N = (32, 29, 31, 30)
+    k.reset_mux()
+    # k.test_mux(mux_id='mux_03')
+    # k._hw.switch_mux([A, B, M, N], state='on')
+    # k._hw.vab_square_wave(12.,1., cycles=2)
+    # k._hw.switch_mux([A, B, M, N], state='off')
+    # k._hw.calibrate_rx_bias()  # electrodes 1 4 2 3 should be connected to a reference circuit
+    # k._hw.rx._bias = -1.38
+    # print(f'Resistance: {k._hw.last_rho :.2f} ohm, dev. {k._hw.last_dev:.2f} %, rx bias: {k._hw.rx._bias:.2f} mV')
+    # k._hw._plot_readings()
+    A, B, M, N = (0, 0, 0, 0)
+    # k._hw.switch_mux([A, B, M, N], state='on')
+    # k._hw.vab_square_wave(12., cycle_duration=10., cycles=3)
+    # k._hw.switch_mux([A, B, M, N], state='off')
+    # print(f'OhmPiHardware Resistance: {k._hw.last_rho :.2f} ohm, dev. {k._hw.last_dev:.2f} %, rx bias: {k._hw.rx._bias:.2f} mV')
+    # k._hw._plot_readings()
+    print('using OhmPi')
+    d = k.run_measurement([A, B, M, N], injection_duration=1., nb_stack=2, duty_cycle=0.5)
+    print(d)
+    # k._hw._plot_readings()
+    print(f'OhmPiHardware: Resistance: {k._hw.last_resistance() :.2f} ohm, dev. {k._hw.last_dev():.2f} %, sp: {k._hw.sp:.2f} mV, rx bias: {k._hw.rx._bias:.2f} mV')
+    print(f'OhmPi: Resistance: {d["R [ohm]"] :.2f} ohm, dev. {d["R_std [%]"]:.2f} %, rx bias: {k._hw.rx._bias:.2f} mV')
+    k._hw._plot_readings(save_fig=False)
+    # plot_exec_log('ohmpi/logs/exec.log')
+change_config('../configs/config_default.py', verbose=False)